Ariston Technologies Logo

Ariston Technologies Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 31 Products
  • 1K Answers
  • 83K Views

maybe a under wire from bras stuck in drum.when machine is empty look in drum holes and see if anything is poking through the holes.keeping turning the drum as you look,sometimes hard too spot has the tips are often white.

Ariston... | Answered on Mar 31, 2015


h2o is the chemical symbol for water. But if the water keeps running and does not stop, even when the machine is full it could be the machine has a defect level indicator, or the water lock does not work. When the lock even don't closes what you remove the power the lock is defect.

Ariston... | Answered on Mar 24, 2015


AH yes front loaders are bad about this type problem .change the detergent to liquid and run a coulpe empty wash cycles with bleach and or baking soda

Ariston... | Answered on Mar 22, 2015


call a repair tech? Fix it? What is the question?

Ariston... | Answered on Mar 05, 2015


Obstruction in the hose or the pump, flush with extra hot water and don't burn yourself, hope this helps.

Ariston... | Answered on Mar 03, 2015


I agree. It sounds like hard water deposits. many states have outlawed phosphate as an ingredient in dishwasher detergents, so the detergents don't work as well anymore. New product designed for this very problem. "Greenest" product ever...it's all-natural and comes shipped to use in a re-claimed water bottle!
www.CloudyDishes.com
CitriClean of Florida CitriClean of Florida

Ariston... | Answered on Mar 03, 2015


THE E USUALY STANDS FOR ERROR THE O7 IS THE ERROR WHICH COULD BE IN THE OVEN,BROILER, OR BURNERS, OR EVEN A TIMER. LOOK UP ON LINE TYPE IN FD87.1 ELECTRIC OVEN MANUAL TO SEE IF A MANUAL IS AVAILABLE THAT YOU MAY BE ABLE TO FIND THE PROBLEM.

Ariston... | Answered on Feb 03, 2015


HI Mostafa.
Try this link.

Search: Aml85 - view online ' e-Manual.eu

Good Luck
Nomess

Ariston... | Answered on Jan 10, 2015


There is no fuse in the machine. The fuse is in the electrical panel of your home. If there is power in the outlet then the fuse is not tripped. If there is no power reset the circuit breaker or (very old) replace the fuse. Here is the link to the manual for the machine.
http://www.aristonappliances.us/_pdf/manuals/ASL75_CXS_MANUAL.pdf

Ariston... | Answered on Jan 03, 2015



Ariston Margherita 2000 Washing Machine


This is only one of the sites that had information/user manuals for you, see if it helps. There are other sites.

Ariston... | Answered on Dec 18, 2014


Either the knob or the switch is faulty. Can you pull the knob off and see if you can set the program with pliers on the shaft?

Ariston... | Answered on Dec 05, 2014


Sounds like a faulty solenoid valve. Does the water over flow the door and run out onto the floor? The other possibility is that the electronics could be faulty energizing the coil when the machine is off but this is not likely. Do you turn the valves off at the source when you are not using the machine? This would be a simple fix versus going into the machine to find out if the coil is energized or to replace the solenoid valve.

Ariston... | Answered on Dec 04, 2014


F13. NTC (Dryer Temp) Open / Short
Check wiring continuity to Control Board.
Replace NTC.
Or, replace Control Board

NTC is the temperature sensor

Ariston... | Answered on Nov 15, 2014

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Tom Chichester

Level 3 Expert

54189 Answers

Dado

Level 3 Expert

509 Answers

Are you an Ariston Technologies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...