Arris Logo

Arris Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 271 Products
  • 3K Answers
  • 711K Views

There are no drivers for the arris cable modem unless you are using USB.

If you are using ethernet then it is simply plug and play. You may need to press the reset button on your arris.

Thank you.

Arris Touchstone... | Answered on Aug 14, 2019


1. Unplug all wires to modem, for 5 mins.
2. Reconnect all wires and plug it in. Wait up to 5 minutes to see if it works.
3. If not then replace coax cable
4. Replace Ethernet cable.
If none of this works you may need a new modem

Arris SURFboard... | Answered on Jul 13, 2019


mines in the trash, they keep going bad the shorting out an causing the modem to go dead.

so bought my own (got 2 for backup)
ARRIS SB6183.

no battery is bliss.

or did you mean at garage sale you find a ROHS batt laying on table (that I threw out, LOL) and wonder what it is.?
its a battery and most times no good.

or did you mean you have a modem the battery is dead and wont to buy a new one, and ebay is off line today, that it?

most of these are for VOIP, telephone, use with lost of AC power.
I cut all landline here, and that. so no batteries there. here.
but they are only found on ebay. for sure not in TARGET or Bestbuy.

here go to ebay
then in the search box, type your model model number
eg: ARRIS TG1682G
then at the end type battery.

Arris Computers... | Answered on Jun 07, 2019


Try 192.168.0.1 or 192.168.100.1. Make sure that your pc is connected directly to the Arris TM602G modem and not on a router.

Arris Computers... | Answered on Jan 10, 2019


user: admin
password: password

If you have a retail one it probably won't work.
Instead go to http://192.168.100.1/index.htm

Arris Sb6141... | Answered on Jan 08, 2019


From a quick look at the specifications, it does not appear that that model offers built in WiFi; thus it would not have a WPS button. In addition, I would caution you against using/enabling WPS on any device, as that protocol has been compromised.
As for solution and recommendations -
Obtain a different model from your service provider with the features you require, or obtain an off the shelf WiFi-capable router from an electronics department. This modem would be able to connect to only a single device without the addition of a router; perhaps that fills your needs but I suspect you will want more than that.
If you choose to obtain a router, you will still likely not have a WPS button - because of the security concerns most if not all of them are off the market. No worries though, many manufacturers offer very simple setup alternatives to WPS - sans the known security risk.
Hope that helps you out!

Arris Computers... | Answered on Jan 05, 2019


Shut down your router and disconnect all the cables including power cable and press power button of router for 60 seconds and connect all the cable and connect it to the computer and check

Arris Computers... | Answered on Dec 17, 2018


The article I read suggested 192.168.100.1

admin (no capitals)
motorola (no capitals)

And no need to get your breathing rates high in case you have changed the username/ password of Motorola SBG900 and forgot them, as you can just reset the Motorola SBG900 router by press-and-hold the reset button with a straightened paperclip for about 15 seconds.

http://modemly.com/Motorola-SBG900-router-setup

Arris SURFboard... | Answered on Nov 09, 2018


Have you checked the manual to see if it needs to charge? If so, maybe a day and it should go out.
Or search the model No for that info.

Arris Computers... | Answered on Oct 24, 2018


the vpn connection from your home to work or the vpn connection from anywhere else to your home by vpn.

here you find a forum with the same problem:

http://broadband.motorola.com/consumers/support/faqs/surfboard_faq.asp#cant_login_vpn

Arris SURFboard... | Answered on Sep 26, 2018


get a different receiver and that should fix the problem

Arris Computers... | Answered on Sep 21, 2018


you will have to look in the manual of router. usually 192.168.1.1 is the default ip address for managing router settings from browser. just type the address in browser and login with default username and password if you have not changed it. once the router settings page open up you can then look up the NAT settings there.

Arris WR850G... | Answered on Sep 07, 2018


Apparently user manuals are not provided online by the companies, and the suggestion has been made to review some questions and answers online that might help.

https://forums.xfinity.com/t5/X1/User-Manual-for-Latest-X1-Cable-Box/td-p/2683785

https://forums.xfinity.com/t5/X1/User-Manual-for-Latest-X1-Cable-Box/td-p/2683785

Arris Computers... | Answered on Sep 02, 2018


Why would a cable company turn off someone's modem?

Were you breaking the law?

Arris Computers... | Answered on Aug 25, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Arris Experts

Ekse

Level 3 Expert

13434 Answers

Greg Ulan

Level 2 Expert

195 Answers

Tom Chichester

Level 3 Expert

53615 Answers

Are you an Arris Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...