Arrow Logo

Arrow Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 95 Products
  • 466 Answers
  • 85K Views

Either the piston needs lubricating, or the spring that returns it is broken. Most pneumatic tools do require "pneumatic oil" run into the air line before use.

Arrow Tools &... | Answered on May 16, 2019


MANY YOU JUST NEED TO PUSH IT BACK IN WITHOUT ANY STAPLES INSIDE . THEN IT WORKS UNTIL RUNNING EMPTY AGAIN

Arrow Tools &... | Answered on Feb 27, 2019


I have one it only takes staples!

Arrow Tools &... | Answered on Feb 03, 2019


found this but no manuals

Question: How do you install the nails in this nail gun
Answer:
It's similar to a stapler. Remove the spring loaded slide from the rear. Drop in the the nails and replace the spring loaded slide. $66 seems a little pricey for this device though.
By A. Cook on May 27, 2017

Arrow Tools &... | Answered on Jan 06, 2019


Try it 1/2 inch staple. Don't forset in ( push in hard ) try it if the fit only if they slide inn with no problem voila your stappler can holds 1/2 staples if. "not " you have to go smaller than the actul staple you are using.

Arrow Tools &... | Answered on Nov 08, 2018


Mains powered nail guns with adjustable power contain some electronics and there is a safety switch that prevents operation unless the gun is pressed to a surface.

The design, if not the quality, is common to a host of brands and price ranges, many and possibly all made in China and label engineered.

Using a large electromagnet to drive a nail or staple is an electrically "noisy" method as the coil generates a large back emf that if not adequately suppressed could destroy the control circuit. This could be what has happened due to the probability of the electrical components used not being first quality branded devices but locally produced generic devices rather unsuitable for highly stressed circuits.

Just a guess you understand, it could be the safety switch or the coil or even just a broken wire or a "dry" soldered joint.

Arrow Tools &... | Answered on Oct 27, 2018


Damaged memory card recovery overview
Popular memory cards include the SD card, CF card, xD-Picture card and Memory Stick. Those devices may get damaged due to various reasons such as a power shortage, an incorrect removal of the memory card, virus attack or some other unknown reasons. The accident usually comes with error messages like "memory card error", "card locked", " memory card not formatted error", or an error code on your camera screen and results in terrible data loss disaster. So, how to repair damaged memory card and recover your data becomes quite important if you happen to encounter such a problem.
Here on this page, we will show you how to repair and recover corrupted memory card in two parts.
Repair damaged memory card without data loss using CMD
Once you have damaged your memory card, it is highly recommended to stop further operations on the memory card (e.g. taking new pictures, or deleting or formatting the memory card). And using CMD command line is the first way you can try to repair damaged memory card without formatting. Following is the detailed guide.
(It's worth noting that this method is also available to fix damaged USB flash drive. For other similar demands such as how to recover data from corrupted memory card not detected, please refer to this link.)
1. Insert your memory card into a USB memory card reader and plug it into your computer.
2. Go to the start menu, type in "cmd" in a search bar, hit enter and then you can see something named "cmd.exe" under a list of programs.
3. Right click "cmd.exe" and type in "chkdsk /X /f card letter:" or "chkdsk card letter: /f", for example, "chkdsk /X /f G:" or "chkdsk h: /f" in the following command windows to start to repair damaged memory card without data loss.
Follow all the above steps, you might get a message reads "Windows has made corrections to the file system" in the command window. That means the damaged memory card is successfully fixed. And then you can go to check if you can access your data on the card. If not, you should try a third-party memory card data recovery softwareto get back your data and then act a format command to fix the damaged memory card.
How to recover data from the damaged/corrupted memory card
EaseUS file recovery softwareis able to recover lost files in most data loss cases. You can try it to recover your photos, videos, music and documents if the damaged memory card can appear as a drive letter in "My Computer". Here is the tutorial.
Step 1. Connect the corrupted or damaged memory card to PC, launch EaseUS data recovery software, select the card and click "Scan" to search for all the lost and existing files.
Step 2.A quick scan will start first. After it completed, a deep scan will automatically launch in order to find more files.
Step 3.After the scan, select out those you want to recover.
Finally, click "Recover" button to retrieve them back.
Here, you'd better save all the recovered files on a different drive or device in case of data recovery failure.

Arrow Tools &... | Answered on Oct 23, 2018


Professional-grade varieties are automatic, and fire a nail directly upon pulling the trigger. A semi-automatic nail gun is more appropriate for beginners, since it requires a two step process: pull the trigger and then tap the barrel against the wood. This safety feature protects the user from accidentally firing a nail gun and injuring himself or others.

Arrow... | Answered on Oct 19, 2018


Are you sure you are talking about the clutch as normally this is fitted to the end of the crankshaft that drives the shaft, and you do not need to access this to replace the string. Typically you replace the string by unscrewing the plastic base and then wind on new string, and then screw back on the base. If you are referring to the string used to start the machine and not the trimming line, then you just remove the cover over the starter and wind on a new string. Can you be more specific about what it is you are trying to do and where the problem is.

Arrow Garden | Answered on Aug 26, 2018


Contact Arrow and request it.

Arrow Tools &... | Answered on May 22, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Arrow Experts

JOHN LAPIER

Level 3 Expert

2591 Answers

ray gallant
ray gallant

Level 3 Expert

63941 Answers

Poul Brinchs Larsen

Level 2 Expert

159 Answers

Are you an Arrow Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...