AT&T Lands Phones - Popular Questions, Answers, Tips & Manuals


Is this just for your home or do your neighbours have the same problem? I hope I can help you further, a few more details would help me be able to help you.

Regards Jem

AT&T Lands... | 39 views | 0 helpful votes


I moved you out of USA computer repair
we have no TELKOM in USA< so why not call them in your country. call your service provider in your non USA country.
surely we can not.

AT&T ATT-974... | 41 views | 0 helpful votes


Do you hear tones when you press the buttons to dial?Many phones have the option to dial by pulses instead of tones. Make sure your phone is set to tones.

AT&T Lands... | 45 views | 0 helpful votes


REREAD THE INSTRUCTION MANUAL . IT TOOK ME SEVERAL TRIES TO DO MINE . 40 YEARS AGO

AT&T Lands... | 81 views | 0 helpful votes


If you need the remote access code for the answering system, then the original (default) access code is given in the manual on page 50 (page 53 of the PDF) and on 55 (page 58 of the PDF). See the manual online at https://att.vtp-media.com/ecp/documents/product_Product/364/UserManual/5977/SL82118_manual_i10.pdf . Unfortunately, if the remote access code has been changed, the default code will not work. As far as I know there is no way to reset the SL82318 remote access code to the factory default remotely. See page 50 of the manual to reset the phone's access code when you are using the handset. When you use the handset and start to change the code, the current remote access code will be announced first.

Any voice mail system would be accessed using the phone number and codes from your telephone service provider. This information will not correspond to the answering system of the SL82318.

I hope this helps.

Cindy Wells

AT&T Lands... | 70 views | 0 helpful votes


Reverse the polarity of the phone wires.

-Some phones are sensitive to this; others do not seem to mind.

I believe you should reverse the red and green.

AT&T Lands... | 65 views | 0 helpful votes


Check your ground wire where the phone line comes into the junction box outside your house. It is either loose or corroded. It should be clean and clamped to a ground stake or water pipe like for an outdoor hose faucet. Check both ends of the wire. Without it, the phone system's impedance is so high that it will receive the 60 Hz hum from any electrical appliances around the house that are within a few feet of a line on an extension phone, answering machine or even an extension phone outlet wire running through a wall. These make great receiving antennas. good luck.

AT&T Lands... | 131 views | 0 helpful votes


That is not possible. Deleted means gone for good.

AT&T Lands... | 62 views | 0 helpful votes


If you delete the greeting you recorded, it should default to the canned response.

AT&T Lands... | 87 views | 1 helpful votes


Google (AT&T)(1830)(manual) without parens for instructions.

AT&T Lands... | 232 views | 0 helpful votes


Plug in a "test" telephone. If no dial tone, the problem is outside.

AT&T Lands... | 129 views | 0 helpful votes


Symptomatic of line trouble but could be caused by incorrect battery installation. Connect a different phone to test for dial tone. If no tone, likely line trouble.

AT&T Lands... | 351 views | 0 helpful votes


Search Results

FAQs - AT&T® Telephone Store

https://telephones.att.com/product-support/faqs/symptom/1591/89 Tip 1 of 8. If the phone does not ring at all, you may have the ringer turned off. The handset and base have independent ringer programming. To adjust the handset ringer volume: Step 1: Press MENU/SELECT on the handset when it is not in use. Step 2: Press ?DIR or ?CID to display Ringers, then press MENU/SELECT. Missing: lucent

[PDF]TRIMLINE® Memory Telephone 210 - Amazon S3

s3.amazonaws.com/szmanuals/62619bc8d4792f47b6654ed48c3548a3 AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American .... Ringer Volume. The RINGER volume switch allows you to turn the telephone ringer OFF, or set it to ring at LO or HI volume. You can dial or answer calls normally when the ringer is off. Other telephones in your home will.

How to change the ringer tone on the AT&T Trimline 210 - YouTube

? 2:58
https://www.youtube.com/watch?v=xZxexCm7xtk
Apr 30, 2016 - Uploaded by kmbfanofpacman
I just figured out how that works after the day I got the phone and its pretty cool to be honest.Missing: my ‎lucent

[PDF]AT&T 210 User manual - Multi-Link Inc.

https://multi-link.net/wp-content/uploads/ATT-ATT210-Manual.pdf Make sure the ringer volume switch is not set to OFF. You may have inadvertently turned off the ringer. Press. ,. , , . If there are several other phones on the same ... 11. 12. For Customer Service Or Product. Information, Visit Our Website At www.telephones.att.com. User's manual. Part 2. TRIMLINE. Memory telephone 210. Missing: my ‎lucent

Lucent AT&T Trimline 210 Corded Phone Ring tone - Questions (with ...

www.fixya.com > ... > Lucent > Lucent AT&T Trimline 210 Corded Phone
Lucent AT&T Trimline 210 Corded Phone, ring tone related issues. ... If the ringer volume has been turned off, the handset will not ring ? ... ...ring tone im receieveing the voice ring tone but prefer the volume how can i change my ringtone When the phone is sitting in its normal mode hitting the "flash" button toggles through ...

AT&T Lands... | 351 views | 0 helpful votes


Your new telephone may have been connected incorrectly.

AT&T Lands... | 130 views | 0 helpful votes


can only assume it is not properly connected .

AT&T Lands... | 68 views | 0 helpful votes


maybe someting to do with freqencies

AT&T E2717B Twin... | 216 views | 0 helpful votes


call your service provide to check the land line connection first

AT&T ATT-2231... | 260 views | 0 helpful votes


1st you can download the PDF instruction manual online for free for most products. I'm sure this is one you can find.
Next: I've had a similar problem with my system an (AT&T Dect 6.0).
If I disconnect each battery and plug them back in it usually works.
The there is always resetting the whole system.
Using the PDF you can see how to un-pair all the phones then re pair them making sure you pair the one that says Handset #1 first and so on, if you want them to stay in the order they are in now.
That's what we do because each one of us are used to having each phone.
One of these two methods should solve your problem.
Also, if neither Idea works - youtube has helpful videos on most anything but I suspect one of these Idea's will work.
I've only had to un-pair them when one got broken and I wanted them back in the order they were in.
Usually unplugging and re plugging each of the batteries works.
I don't know what kicks that off but it happens to me once or twice a year. I use Magic Jack and I also have them routed through another PC (that's not on line) witch has (Phone Tray Free), an app that can block calls and show ID on the big Screen and a few more tricks along with a Web cam surveillance system I have running all the time, so in my case it makes some sense it would get screwed up from time to time.
For me, It usually happens when someone picks up the phone before the caller ID can come up or a call comes in and hangs up before the caller ID can see the info.

AT&T EP590-2... | 221 views | 0 helpful votes

Not finding what you are looking for?
AT&amp;T Logo

2,213 questions posted

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Cindy Wells

Level 3 Expert

6046 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...