Brother DCP - Recent Questions, Troubleshooting & Support


DCP j125 Inkjet printer stopped printing showing msg. ink absorber is full. What to do

Brother DCPJ125... | Answered on Jul 08, 2019


Cooling fan blocked check and clean

Brother... | Answered on Jun 21, 2019


The slides you are moving are for the drum units, you could try using canned air to blow in the same area that the sliders slide across, if that doesn't help you may need a new drum unit..

Brother... | Answered on May 16, 2019


Hi, check to see if there is any foreign object jamming the print mechanism, check all drive belts. If this doesn't show nup any problems, I'm afraid that you have a failure that will require dis-assembly and repair by a company who deals in these printers.

Brother DCP 130C... | Answered on Apr 24, 2019


Power the machine off by holding down the power button. Wait a few seconds and then power the machine back on. - If no error message appears on your machine's

Brother DCP-1510... | Answered on Apr 20, 2019


Clean head aliment sensor

Brother... | Answered on Apr 17, 2019


Turn off printer pressed menu then on press 99 ok

Brother DCP-7020... | Answered on Apr 14, 2019


Scanner error check scanner cable and strip

Brother DCPJ315W... | Answered on Apr 13, 2019


Open front cover press back key replace drum press yes and off on machine

Brother DCP-7020... | Answered on Apr 13, 2019


First you need check your ink cover is probably working like open close after that open ink cover and install cartridges slowly

Brother DCP-195C... | Answered on Apr 13, 2019


Do not use single paper in paper tray use multi papers and also clean paper feeder

Brother DCP 115C... | Answered on Apr 13, 2019


Reset DCP 7030 drum unit : -LCD-
Press MENU and turn on printer - MAINTENANCE
arrows 81 and OK -RESET DRUM COUNT
press OK -RESET LIFE COUNT
press CLEAR / BACK
arrows 99 and OK
ready

Brother DCP-7020... | Answered on Apr 13, 2019


Clean matance box ?? also matance box small switches

Brother... | Answered on Apr 13, 2019


First release ink cover door after that install Catradge slowly if problem is still clean Catradge sensor but first check ur ink cover open close is working or not

Brother... | Answered on Apr 13, 2019


Unplug the power card pressed menu button and then plug ?? in power cord till display showing matance mode.. After that release menu button use up and down key use up 8 press ok then also use up key press 0 and then use mono button and got purge count use up and down keys press 4 ok 8 ok 2 ok 3 ok purge count 0000 then off and on peinter and enjoy

Brother... | Answered on Apr 13, 2019


Print head is damaged. Needs repair or replacement.

Brother... | Answered on Apr 13, 2019


r4eplace the maintenance unit

Brother DCPJ315W... | Answered on Mar 26, 2019


The printer have its own initialization but seem to fail to complete initialization process. Check and clear the carriage jam, open check for motor failure in the carriage system.

Brother DCP-195C... | Answered on Mar 20, 2019

Not finding what you are looking for?

-1,140 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Brother Office Equipment & Supplies

  • Forum

View Most Popular

  • Brother Office Equipment & Supplies
Loading...