Radio Communications - Popular Questions, Answers, Tips & Manuals


You need to be a very good technical person with electronics to work on these. The issue is most likely a PLL board issue. You need to be able to troubleshoot to the component level. The service manual appears to be https://www.manualslib.com/manual/738448/Icom-Ic-706mkiig.html

Icom Radio... | 29 views | 0 helpful votes


Possibly from the manufacturer/distributor

Radio... | 23 views | 0 helpful votes


There are so many online centers from where you are planning to get lifepo4 battery pack for next use. Before you can end up with the right choice, it is mandatory to log online and check out the credentials of the firms, before you end up making any choice. The significant firm will offer light in weight batteries, which are subject to last long. The prices of lifepo4 battery 12v will be a bit expensive for sure but the items will work more like one time investment plan over here. Once invested, the items are subject to last long.

Radio... | 25 views | 0 helpful votes


Internal circuitry needs repair, which is a task for a repair shop with access to diagrams and test gear.

Radio... | 20 views | 0 helpful votes


Because your Radio is not power up so you have must change the EEPROM of your radio from Radio Service Shop, because your old EEPROM all data erased. Normally during update failure this not happen and Radio powerup, only programming of radio erase and LCD show no program and thid fault can be rectify when again updating process run, but your problem is not like that, your radio is not powerup, so you need to change EEPROM then your problem will be solve

Kenwood Radio... | 64 views | 0 helpful votes


Contact Midland directly to inquire.

Midland Radio... | 19 views | 0 helpful votes


yes, they are infuriating.

Try this

turn one on.
turn the other on, when stable press the button twice quick.
go to the phone bluetooth, connect on the single line that says i7, NOT any of the two numerical lines at the bottom.

Radio... | 28 views | 0 helpful votes


Raymarine Ray55 Manuals Down Load user manual and reset MMSI according instructions.

Radio... | 76 views | 0 helpful votes


You check your radio with other radio very near. If radio is hearing your transmission then it mean that your Radio Power Module not working if very near radio not listening you then your preamplifier and Power amplifier is not working, it mean your Radio Transmitter faulty, only Receiver is working, you consult with any Radio Service shop. One other thing if you have software also check Tx/Rx frequency it must be same for simplex operation.

Radio... | 72 views | 0 helpful votes


Use the AUX jack, the old cigarette lighter jack to get a 12V feed. It will work fine as long as you are not using a linear amplifier with the radio.

Radio... | 46 views | 0 helpful votes


Seen one of these sold on Ebay. The included power supply was rated at 12 volt, 100 ma.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F232165203679

Picture 3 of 6

Realistic New... | 38 views | 0 helpful votes

Not finding what you are looking for?
Radio Communications Logo

47,034 questions posted

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18072 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...