Dishwashers - Page 2 - Recent Questions, Troubleshooting & Support


these have a bad door switch that collapses after time check that the thermal near the main motor is not fallen away from the body or a terminal has not come away or test the thermal with continuity tester meter see if the thermal is bust

Dishwashers | Answered 2 days ago


e09 is a heat ump fault , the heater is incorporated into the motor , you will have to change the whole unit (quite expensive)

Neff Dishwashers | Answered 2 days ago


This is probably either the inlet valve or the flow sensor, which is fitted the the heat exchanger tank on the left side of dishwasher

Dishwashers | Answered 2 days ago

Tip

Determining the Age of Your Fisher & Paykel Appliance


This advice applies to Fisher and Paykel appliances. Determining the manufactured date of most appliances is accomplished by looking at the SERIAL NUMBER. On Fisher and Paykel appliances this is determined by the by the 1st two letters of the serial number.

The 1st letter represents the YEAR of manufacture.
The 2nd letter represents the MONTH of manufacture.

Example: DHL121796


LETTER YEAR

C - 1
U - 2
M - 3
B - 4
E - 5
R - 6
L - 7
A - 8
N - 9
D - 0

LETTER MONTH

F - 1
I - 2
S - 3
H - 4
E - 5
R - 6
P - 7
A - 8
Y - 9
K - 10
U - 11
L - 12

In this example the appliance was manufactured in April of 2000.


2 days ago | Fisher and Paykel 23 in. DD-603...


Make sure there isn't a restriction in the machine-such as clogged filter, hoses etc.

KitchenAid... | Answered 3 days ago


Check whether the pump runs when you start a new cycle as this is the default behaviour for most machines to ensure that they are empty before starting the wash. If the pump runs then it likely that the filter in the bottom of the machine requires cleaning.

Maytag... | Answered 3 days ago


You can purchase it on amazon, click here and take a look: Amazon com dishwasher . I hope this was helpful. Cheers

Whirlpool 24 in.... | Answered 3 days ago


We read on google that a lady had this problem and we copied her instructions to see if it worked and am so pleased to say it did.
OUR PROBLEM WAS WE HAD E15 AND NO WATER IN THE BOTTOM OF OUR DISHWASHER, BUT THE PUMP STILL KEPT GOING ON AND OFF. EVEN WHEN THE ON/OFF BUTTON ON THE DISHWASHER WAS OFF.WE PULLED THE DISHWASHER OUT AND TILTED IT BACKWARDS (WHILST STILL ON), AND AFTER A MINUTE THE SETTING RETURNED TO NORMAL.So do try this before you call an engineer.

Bosch... | Answered on Jan 15, 2019


More likely you have bad touch panel you get corrosion on the ribbon connector between control board in touch bad

KitchenAid... | Answered on Jan 15, 2019


Other blinking lights or beeping sounds may indicate a problem with the dishwasher caused by power surges. Try pressing the "Start/Reset" pad to reset the dishwasher and wait 2 minutes. If the problem persists, reset (reboot) the dishwasher by turning off power to the unit at the house circuit breaker/fuse box for 30 seconds. Restore power and the dishwasher should function normally.

Dishwashers | Answered on Jan 15, 2019


HOW WOULD WE POSSIBLY GUESS AS WE CAN NOT TEST IT THRU THE AIRWAYS

Dishwashers | Answered on Jan 15, 2019

Not finding what you are looking for?
Dishwashers Logo

89,756 questions posted

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike

Level 3 Expert

4356 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Brad Brown

Level 3 Expert

17816 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...