Freezers - Recent Questions, Troubleshooting & Support


The temperature control is located inside the freezer on upright models, and onthe left outside wall on chest models. The temperature is factory preset to providesatisfactory food storage temperatures.

However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. If acolder temperature is desired, turn the temperature control knob toward COLD-EST and allow several hours for temperatures to stabilize between adjustments

Frigidaire... | Answered 2 days ago


Most freezers now will cycle the power light on and off when the unit is operating. When it turns off, the unit has reached temperature.

Freezers | Answered 3 days ago


Settings are always best, just one side or the other of halfway. So, if you have a rotary dial that goes to 10, - 4 , 5, or 6.

With an electronic setting, it should be minus 18'C or 0'F. Check with a freezer thermometer to confirm.

https://www.google.com/search?q=lceline+deluxe+u788+freezer&rlz=1C1QJDB_enCA643CA644&oq=lceline+deluxe+u788+freezer

Freezers | Answered on Jun 13, 2019


There is probably a safety device of some description incorporated into the design though it probably isn't to blame for the trouble.

You need to discover whether it is the fan, compressor or both; neither should run constantly. The condenser fan is only needed while the compressor is pushing the refrigerant around the circuit and in many designs, where a belt driven compressor is used it is usual for the fan to be mounted on the extended motor shaft so they can't run independently.

If the compressor runs constantly and the cabinet doesn't suffer from excessive freezing it is almost certain either the compressor is failing or there is a leak and refrigerant is being lost - probably the latter.

Freezers | Answered on Jun 13, 2019


its not running correctly- getting warmer-ajar door

Freezers | Answered on Jun 12, 2019


Try sealing the door with tape to see if the thermostat will work to turn it off.
My Kenmore upright freezer had a separate cross seal down quite low, on the freezer not the door. I reversed the door seal so the damaged top part was below the cross seal and voila, no more leak.
If it needs a thermostat I suggest getting it sealed first. Mine was only 10 or so years old but Sears Parts said seal no longer available. Good luck

Freezers | Answered on Jun 10, 2019


Might be for quick freeze. Have you Googled the model number?

Freezers | Answered on Jun 10, 2019


manufacturer -small appliance shop --online search

Freezers | Answered on Jun 09, 2019


Freezers expel warm air. There should be no 'blowing' inside. If it is expelling warm air, then it is working fine, eventually the expelled air should get cooler and cooler.

Frigidaire... | Answered on Jun 06, 2019


i had the no ice making issue , it was running water in the tray but not enough to make the ice. I call service for the machine it self and they told me to . 1. turn machine on . 2. press the select button for 10 sec. then 3. press the power button for 10 sec. and then turn off the machine and unplug it for 6 hour but I only did it for 1 hour. when I plugged it back in and started it. It is now making ice.

Igloo Cooler... | Answered on Jun 05, 2019


call a repair service or go buy a new one

Frigidaire... | Answered on Jun 04, 2019

Not finding what you are looking for?
Freezers Logo

14,091 questions posted

Ask a Question

Usually answered in minutes!

Top Freezers Experts

Dennis Boxerman

Level 3 Expert

1290 Answers

AJMAL KHAN

Level 2 Expert

388 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you a Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...