Garment Steamers & Presses - Answered Questions & Fixed Issues


Need Water Tank top cap which is brocken

Homedics Garmet... | Answered on Jul 02, 2018 | 1,511 views


steamers are usually believed to be easier to use and less damaging to the fabric over time

Garment Steamers... | Answered on Jan 11, 2018 | 1,248 views


I thought my old one was faulty so I bought a new one and still experience the same wrinkling problem!

Corby Trouser... | Answered on Oct 05, 2017 | 2,188 views


this is fixya we are not associated with rowenta ==you need to make your request thru them we have no access to yours or their accounts

Rowenta IS6200... | Answered on Sep 16, 2016 | 914 views


The steam generator is defective.

Euro-Pro Shark... | Answered on Aug 29, 2016 | 1,122 views


you sure on the model number as it is not in
http://www.sav.rowentausa.com/Pages/instructions.aspx
suggest re checking the reference number as shown on the web page at rowenta it may be different and searching for it in the web page as I am having hard time finding anything for DW1040

Rowenta... | Answered on Aug 13, 2016 | 980 views


tighten the needle thread tension up as it sound like bunching up under the material

Singer 625 Touch... | Answered on Oct 06, 2015 | 1,148 views


Try the place that you bought it. They may have the supplier / manufacturer information of where you can get parts from.

Yamata PSS-2001... | Answered on Sep 19, 2015 | 1,240 views


I don't have a manual but these are extremely simple to use once and there is a demo on youtube for business shirts How to use Elna Press for Ironing Shirt and other videos from same member show sheets and jeans. Technique is simple, place part of garment onto the board with the rest sitting on your knees (use press sitting down in front of it) to take the weight, lower press closed with your left hand, then bring the spring loaded right handle down to apply the pressure, this has a big spring behind it and applies pressure, wait 2-3 seconds then lift right handle to release the pressure and then using your left hand grip the whole press will want to open up again. That's it! Set the temperature setting on the press and iron from your lowest temperature items first, nylons, up to cottons, linens on the hottest setting last as it will take 5 minutes or so to come up to full temperature. If you have the vapojet spray attachement, then you fill this with tap water and slide it onto the handle, give it a spray with the press open before you close to press and it turns to steam. Cleaning the top hot plate can be done with a special cleaning stick product you can buy (or any similar iron cleaning stick will work too, but you need to apply it to a hot plate so be really careful as you do this, then wipe it off with some waste fabric. Great press to own and perfect for applying interfacing if you are a sewist, (just use a piece of waste fabric so side of the interfacing doesn't attach to the top plate or your bottom cover).

Garment Steamers... | Answered on Jun 24, 2015 | 1,224 views


quite likely the manufacturer is the only place .

Homedics Garmet... | Answered on Jun 12, 2015 | 2,368 views


fill out the card and post it off or contact the service department of the company( manufacturer)

Black and Decker... | Answered on May 20, 2015 | 1,168 views


Not an answer, but a note to say this same thing has just happened with mine in Sydney. Its only three months old. I have contacted Deals Direct, and they don't have any repair options. They won't replace it becuase they model they have in stock is a newer one to the one I have, so a return seems to be the only option. Pity, because I loved this thing. It really made ironing easier.

Garment Steamers... | Answered on Apr 17, 2015 | 1,339 views


depends on how old it is, try to rinse it with a water and vinegar solution, this might help

Euro Cuisine... | Answered on Apr 09, 2015 | 1,369 views


make sure its not clog or the safe is not been kick.

Rowenta IS9100... | Answered on Mar 11, 2015 | 1,604 views


try it in another power point , otherwise have it repaired at a service center . not suitable for home repair.

EuroSteam Steam... | Answered on Nov 13, 2014 | 1,439 views

Not finding what you are looking for?
Garment Steamers & Presses Logo

Ask a Question

Usually answered in minutes!

Top Garment Steamers & Presses Experts

ray gallant
ray gallant

Level 3 Expert

63596 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Tom Chichester

Level 3 Expert

52794 Answers

Are you a Garment Steamer and Press Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...