Heating & Cooling - Recent Questions, Troubleshooting & Support


Google (fedders)(A6Y)(manual) without parens.

Fedders Heating... | Answered 4 hours ago


Request from the manufacturer/distributor

Heating &... | Answered Yesterday


Locking/Unlocking the Keypad
To prevent unauthorized use of the thermostat, the front panel buttons may be
disabled. To disable, or 'lock' the keypad, press and hold the MODE button.
While holding the MODE button, press the WARMER and COOLER buttons
together. The (pic of padlock)
icon will appear on the display, then release the buttons.
Press all three
buttons in the order
outlined above for
keypad lockout
To unlock the keypad,
press and hold the MODE button. While holding
the MODE button, press the WARMER and COOLER buttons together.
The (pic of Padlock)
icon will disappear from the display, then release the button

Thermostats... | Answered Yesterday


There are 25 brands...Send picture of screw head?

Heating &... | Answered Yesterday


could be capacitor? Check it, see if it looks like it expanded.
If so replace. Use screwdriver and short terminals to ground before touching wires and obviously turn off power first!

Heating &... | Answered Yesterday


Need to go up there and give more info. Look for outdoor fan...Is it spinning? Compressor on? Could be dual capacitor as they are 50% of problem lately

Dometic Heating... | Answered Yesterday


On a Honeywell thermostat the flashing means that the system is in a delay to turn on the compressor. This is used to protect the compressor from coming on and off too often. The normal delay is about 5 minutes. After that the system should come on. If not there is s problem.

In order to help us help you we will need a little more information. What happens either at the inside unit or at the outside unit after the thermostat stops flashing "Cool"? Any fans come on? Do you hear a "KLUNK"? Any sparks? Please let us know so we can help.

Honeywell... | Answered Yesterday


What is the make / model of your air conditioner. With out that information i cant help you with your ac repair problem.

Check us out online at AC Services Boca Raton

Heating &... | Answered Yesterday


It probably has something shorted to ground or the compressor or motors are stuck causing a high amperage problem. The breaker is probably fine but it also could be weak but normally its the compressor or a component has faulted to the compressor. If the unit immediately trips breaker its probably shorted to ground. If the unit struggles to start and a few seconds pass before it trips then it may be a component fault.

Emerson Quiet... | Answered Yesterday


Water pump for cooling, malfunction.

Star Heating &... | Answered Yesterday

Not finding what you are looking for?
Heating & Cooling Logo

132,886 questions posted

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3425 Answers

Donni Steen

Level 3 Expert

687 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...