Masonry Tools - Recent Questions, Troubleshooting & Support


You need to remove the right side cover, indicut knob, crank, and cutterlock knob. Remove the top cap (4 screws) crank the motor asssembly to the top exposing two hidden screws in side wall, remove those and the two at the top and remove sidewall. . Tension adjustemnt screw is right near the motor pulley. Loosen it and push motor inward while sliding belt over pulleys. It is a little tough getting the belt in between the pulley and main carriage. If you attempt to put the belt on one pulley at a time, you are working a diagonal, which is longer that the inline dimension. Apply a drop of liquid dish detergent to each pulley for lubrication. Start the edge of the belt onto both pulleys; making sure the splines & grooves are aligned on both pulleys. Slowly work the belt on, 32nd of an inch at a time one pulley, then the other. Wash the soap off when you are done'

Ryobi Thickness... | Answered on Feb 03, 2019


Something called Portland cement is the most common and it is made mostly of limestone.

Masonry Tools | Answered on Dec 28, 2018


I called sears and they actually HELPED

Ryobi Masonry... | Answered on Apr 30, 2018


Not all portable thicknessers have a power feed and the stock does have to be forced through.

Planers with a power feed can be choosy about whether they work or not, depending on the size of cut the planer is set for - too big a cut and they don't work, too small a cut and they don't work. This is especially true of those entering middle-age. Considering most of the parts for your machine are obsolete and no longer stocked, I guess that is where your machine is now...

You need to examine your machine to check it it has a power feed and if it does, you need to dismantle it and check all the parts and the drive are fit for the purpose.

Delta Masonry... | Answered on Apr 23, 2018


Try Googling (mastercraft )(55 5512-2)(manual) without parens.

Masonry Tools | Answered on Mar 12, 2018


I have one and can scan it and send it to you if you still need it.

Masonry Tools | Answered on Jan 07, 2018

Not finding what you are looking for?
Masonry Tools Logo

702 questions posted

Ask a Question

Usually answered in minutes!

Top Masonry Tools Experts

frankcw1

Level 1 Expert

15 Answers

Tom Chichester

Level 3 Expert

50994 Answers

ray gallant

Level 3 Expert

60562 Answers

Are you a Masonry Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...