Office Equipment & Supplies - Page 3 - Recent Questions, Troubleshooting & Support


Could you please tell us how you solved it?

Epson Office... | Answered 22 hours ago


Can you please tell us how you solved it?

Epson Office... | Answered 22 hours ago


MORE THAN LIKELY YOU CAN NOT , AS NO ONE MAKES THEM . TOO CHEAP

Office Equipment... | Answered 22 hours ago


I am living in a Pakistan Village and have cyocera K-6030. I am facing an error on control pannel C3300, I would be most grateful, if I may be informed only that in which part of the machine this fault of C3300 is? it solution please. Thanks with regards. my e mail no is gmtyping@gmail.com and gmtyping@yahoo.com. If some one here can show me its solution, because my e mail is also not opening. thanks. my name is ghulam muuhammad

Kyocera Km-6030... | Answered 22 hours ago


Error C3300 is a CCD Automatic Gain Control issue.

It could be poor contact in the connector terminals from the SHD PWB to the CCD PWB.

It is more likely a defective exposure lamp or inverter board that powers the lamp.

Try lifting up the Document feeder so you can see the optics frame through the platen glass and turning off and then on, the main power switch to see if the green exposure lamp illuminates.

A better, but more complicated way to check the lamp is to enter the service mode and run the exposure lamp test simulation. I will outline this procedure below. BE SURE NOT TO MESS WITH OTHER THINGS IN SERVICE MODE OR YOU COULD RENDER YOUR UNIT COMPLETELY UNUSABLE.

To Enter Service Mode:
Hit the "Status" button

Hit the following sequence on the numerical keypad:
1 0 8 7 1 0 8 7

You should be in service mode.

Use U601 by typing 6 0 1 and then "Start"

U601: Turning the exposure lamps on
Description: Turns the exposure lamp on.
Purpose: To check the exposure lamp.
Display:
CCD: Main Exposure Lamp
CID: Document Processor Exposure Lamp (inside the feeder)
Method
1. Press the start key.
2. Select the item.
3. Press the start key. The selected lamp lights.
4. To turn the exposure lamp off, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

After checking the lamp(s) operation hit "reset" a few times to back out where you can type 0 0 1 "Start" to Exit Service Mode.

Office Equipment... | Answered 22 hours ago


The sensor that tells the printer how much paper is available for use is a likely cause. Unplug your printer then plug it back up after a few minutes- this may reset it and stop the issue. You can use the troubleshooting feature that's usually in your printer's software which is already installed and found with the other programs on your computer.

Please click "Helpful" if you found gbis helpful at all. Have A Great Day!

Samsung Office... | Answered 23 hours ago


Online marketing is faster and cost effective, thus I choose Marketing online of my products and services.
One of the best way is email marketing, you can easily send daily newsletters, product information and offers through mail to your target audience.
You can easily find your target audience and extract valuable information with the help of web data extractor and email scraper.

Global Marketing... | Answered 23 hours ago


It's likely just a simple issue like the paper not being perfectly straight at the area in which the paper feeder pulls the paper into the printer itself. Also, try using less paper in the stack that's sitting in the paper tray eItuibg to be used. Too much paper causes this commonly.

Please click "Helpful" if you found gbis helpful at all. Have A Great Day!

Samsung Office... | Answered 23 hours ago


You should start by aligning your printer cartridges, this is simply done from the settings or maintenance menu within your printer's software that's installed on your computer. You may double check the ink level too, that's the most coin issue for your issue, but hopefully the alignment will do the trick. If this helped you in any way please let me know by clicking the Green "Helpful" Icon as that's the best indication to me that I'm doing my part to be helpful. Leave a review or follow me as I answer auto, mechanical, & technical questions of all kinds.
*****See the attached images below and click the link I've included for further explanation if needed- it covers a lot!
Thanks and have a Great Day!

If this helped you in any way please let me know by clicking the Green "Helpful" Icon as that's the best indication to me that I'm doing my part to be helpful. Leave a review or follow me as I answer auto, mechanical, & technical questions of all kinds. Thanks and have a Great Day!
e5017a8e-9688-47e7-ae5d-a4d0423561fd-et5fmljujsy2nzvfvgwmlviv-2-0.jpeg

09e513d7-4025-40ea-9f4f-dae5193dfe9b-et5fmljujsy2nzvfvgwmlviv-2-2.jpeg

c6e2ff2e-373c-45af-a048-a6dd08a2c487-et5fmljujsy2nzvfvgwmlviv-2-5.jpeg

Samsung Office... | Answered 23 hours ago


If u have a very less number of plants...U may just spray the plants with a strong jet of water.

some of the toilet soaps will be effective.like the ones containing potassium or coconut oil. so, buy some hand soaps or shampoos, that contain these oils(also soyabean oil, fish, vegetable), make them as a mild liquid solution and spray on ur plants.

If u dont get one, combine ur homemade soap solution with the above mentioned oils and do the same.

Office Equipment... | Answered 24 hours ago


hi! this is Alex Walker expert to help you call me on 518-348-9393 Thank you

Canon Office... | Answered Yesterday


Sana, You may have to reset printer. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Epson L800 printer alternate red light blinking error Reset Epson L800
How to fix my epson L800 printer 2 red lights flashing at the same time...
https://files.support.epson.com/htmldocs/pho140/pho140rf/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Epson&file=Probsolv.5.1.html

Epson L800 Ink... | Answered Yesterday


Download Adjustment Program Epson R200, R210 Download Adjustment Program Epson R220 - R230 Download Adjustment Program Epson R240 - R245 - ...

Office Equipment... | Answered Yesterday


Hiring a part-time maid or using a regular housekeeping service is certainly one of the best solutions. When we leave the household chores in the professional's hands, it is when we have more time with our family after work. It also means we can recharge our batteries to keep living an energetic life.

Now you want to know which are the trustworthy cleaning companies to check out?

Good Home Services help customers hire trusted professionals for all their service needs.They are staffed with young, passionate people working tirelessly to make a difference in the lives of people by catering to their service needs at their doorsteps.

Get Most Reliable #Commercial #Cleaning Service at very affordable rates.
Call now : +91 90202 08010
Visit for more - https://goodhomeservices.in/

rawpixel-777268-unsplash-3k2virig5x2csfeeqhv2i553-3-0_0.jpg

Office Equipment... | Answered Yesterday


First! What is a "Global Pub Fruit Machine"? I'm thinking it is a world-wide machine that dispenses fruit inside a bar or pub?! Sorry,. IDK what you mean! Is this a Joke? I need (A LITTLE) more info. Please

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Office Equipment... | Answered Yesterday

Not finding what you are looking for?
Office Equipment & Supplies Logo

588,402 questions posted

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8080 Answers

Cindy Wells

Level 3 Expert

5719 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...