Refrigerators - Page 8 - Recent Questions, Troubleshooting & Support

That is shown as being 20.3 cubic feet.

GE Refrigerators | Answered on Mar 08, 2019

WHIRLPOOL WRF40 Solution to this problem!!! very easy ----I assume you have a problem with the control board switching on and of erratic when you pass setting 3 on the LED display, the designers of this fridge left the calculator at home that day, ask a technician to replace the Resistors 5, 6 & 7 (330 OHM 1/4 watt) on your electronic control board with 680 OHM 1/4 watt. This would solve the problems with this board, the LEDs will not be as bright as they were but still highly visible. Questions?

Whirlpool... | Answered on Mar 07, 2019

Granite. Marble is for work surfaces.

Refrigerators | Answered on Mar 07, 2019

suspect it needs freon added and if not equipped with the fitting then only a pro can do it

Refrigerators | Answered on Mar 07, 2019


Refrigerators | Answered on Mar 07, 2019

freezer-4taeoove4xnr5af20ezqxfvu-4-0.jpeg The book says you can set the temp to -16. It also says it will DISPLAY the current temp in the center of the freezer. It appears to be working as designed.

Refrigerators | Answered on Mar 07, 2019

A refrigerator. or freeze has to be kept in a vertical position or fluids in the compressor can seep into the wrong place and freeze up the compressor. liquids will not compress. A compressor replacement will probably fix it.

GE Refrigerators | Answered on Mar 07, 2019

Your water filter, if you have one installed, is located in the light housing of the top shelf. It is easiest to take your food off of the top shelf and remove the shelf to get easy access to it. I normally place a towel under it to catch any drips. If you do not see the canister hanging down then the bypass is likely installed. This is not a filter and can be used if no filter is desired. The "change filter" light will go off after a certain amount of time, or usage regardless if the filter,or bypass is installed.

LG LRSC21935TT... | Answered on Mar 06, 2019

Check the fan behind your fridge it may be stuck. Be sure to TURN OFF the refrigerator before touching any components. It could be rodent or just lint dust build up or if you recently moved it I've water tray could be hitting the fan not allowing it to turn.

Refrigerators | Answered on Mar 06, 2019

Not finding what you are looking for?
Refrigerators Logo

171,776 questions posted

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts


Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Gil Shultz

Level 3 Expert

3382 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides