Televison & Video - Page 8 - Recent Questions, Troubleshooting & Support


Hi there,
To program the Kingavon Home & Leisure 8 in 1 Remote Control RC81S:
SETUP by MANUAL SEARCH
A: Power on the device that you want to control. If it is a VCR, it must be inserterted with a tape. *(This works without a tape)*.
B: Press and hold [SET] key and press the device key (TV1 etc) at the same time.
C: The LED will be on at the moment. Then release the pressed keys.
D: Press the [POWER] key again, then release it. The remote control enters into Manual Search Mode and the LED keeps flashing.
E: Point the remote control to the device, and then press the [POWER] key. See if the device reacts or not. If it reacts, turn to step F. If not, repeat step E (press the [POWER]) every 1 Second.
F: Test other keys, if they do not work good enough, return to step A.

Televison &... | Answered 2 days ago


I LOS MY CD TO DAWNLOD HELP ME WITH DRIVERS PLZ

Philips SAA7130... | Answered 2 days ago


change the input

Televison &... | Answered 3 days ago


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Sanyo Televison... | Answered 3 days ago


5 times blinks denotes Panel I2C COMM Error BB or Source board Error If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Error codes details [LED Blinking codes] to many popular brand TVs and other devices are given in detail.

Sony Televison &... | Answered 3 days ago

Not finding what you are looking for?
Televison & Video Logo

649,420 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Cindy Wells

Level 3 Expert

5913 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...