Televison & Video - Popular Questions, Answers, Tips & Manuals


Contact Hisense to inquire.

Hisense... | 1,431 views | 1 helpful votes


it seems a problem with backlit. must be a shorted solid capacitors small rectangular type near the lcd connectors. check with the ohm meter and if shorted just remove it. dont bother to replace it.

Samsung... | 482 views | 1 helpful votes


It could be the conection ribbon between the T com and main board remove carefully clean and replace ,it should do the trick if still the same then most likely T -com

LG Televison &... | 453 views | 2 helpful votes


https://www.myblackwebremote.com/
Code list 4
  1. Lookup Code for your device


Device Category - Select a category - AUDIO Blu-ray Player CBL_SAT_DVR Digital Converter Box DVD DVD/VCR Combo GAME HDMI Switch HDTV Set Top Boxes HOME AUTOMATION HTIB(Home Theater in a Box) Media Center PC Sound Bar Streaming Media Player TV TV/DVD Combo TV/VCR Combo TV/VCR/DVD Combo VCR - Select a category - Brand Name
- Select a brand - - Select a brand - Watch our helpful remote programming video or follow the instructions below for programming your remote.

Direct Code Programming Instructions Using the code(s) provided above, program the remote control directly using the following steps.
  1. Enter Setup Mode

    Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUPbutton. The red light will remain on.
    NOTE: The red light with either be a small light at the top of the remote or the power on/off button.
  2. Press the device type button

    Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.
    NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.
  3. Enter the device code

    Use the number buttons on the remote to enter the first code shown above. The red light will turn off after entering the fourth digit.
  4. Tests the results

    Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.
  5. Repeat this process for your other devices

Televison &... | 308 views | 0 helpful votes


WHY DON'T YOU ASK SPECTRUM ?

Televison &... | 230 views | 0 helpful votes


I suspect the DMR-BWT460GN has a weaker tuner than the DMR-BWT700. You can try moving your antenna. If it's outside, try a taller mast and make sure to check that the antenna hasn't rotated a few degrees on the mast. If you have an indoor antenna, switch to an outdoor one that is as high as possible.

If the transmitters are in different directions from your location, you can try combining the signals from two antennas pointing in the different directions. Alternatively, try an antenna rotator to move the antenna to align with the transmitters, as needed. (There are some that are automatic and change direction when you change channels.)

I hope these ideas help. Unfortunately, the only other option is to try and find a recorder with a better tuner. That would require trial and error testing with multiple boxes due to manufacturing issues.

Cindy Wells

Panasonic... | 86 views | 0 helpful votes


This problem is related to the mainboard and should be replaced. You can try to heat up the microprocessor with a heat gun though best solution is to replace mainboard. Part number is EBU60864321.

Hope this helps!

LG Televison &... | 60 views | 0 helpful votes


Even though it's late now. Just change batteries. It worked with mine.
And Merry Christmas
-Ernestinaxx

Televison &... | 163 views | 0 helpful votes


USB on the back of tv's is for flash drive input only. you cannot plug in anything to connect to an external machine.

Vizio Televison... | 817 views | 1 helpful votes


0271, 0285,0299
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" of your device; that you want set-up code, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. /

Televison &... | 71 views | 1 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}/

Vizio Televison... | 134 views | 0 helpful votes


Compare the two side by side, double check your connections,check the pins,are they in the same line up +/-, did you ground yourself before doing the install

Vizio Televison... | 479 views | 1 helpful votes


It will be difficult to get a universal remote control for most brand DVD players. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
https://homenol.blogspot.com/
https://electrohelponline.blogspot.com/
https://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts. /

Sanyo Televison... | 159 views | 0 helpful votes


Apparently only hackers from Russia can join
.

Televison &... | 337 views | 1 helpful votes


This set is known for backlight failure..seldom do the power boards fail in this model TV..if your able to replace the LED strips you can get it working again, if not take it in for service but it won't be cheap...around $150

LG Televison &... | 777 views | 1 helpful votes


The PBS channel is not supported by earlier Roku Models, But Now you can add in new Roku models, you can download from your Roku Channel store. To activate the PBS Channel on Roku visit the link https://www.go-roku.com/pbs-org-activate/

Roku Televison &... | 523 views | 1 helpful votes

Not finding what you are looking for?
Televison & Video Logo

644,568 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Cindy Wells

Level 3 Expert

5720 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...