Watches - Page 2 - Recent Questions, Troubleshooting & Support


Hi, Dan, I have 2 Dunhill ighters that work but they leak butane. Making them unfit for use. I would like to have them repaired/rebuilt. I believe they are 1960-70's vintage so, the lack of parts will definately be an issue here. Please advise. Thanks Glenn ghelfne1@nycap.rr.com

Watches | Answered on Aug 16, 2019


I would go to the manufacturer's website and check for an instruction manual.

The Watches | Answered on Aug 15, 2019


Other than contacting Versa directly and asking them where the nearest stockist of a replacement bracelet is, to your location, then the only other option is to use a specialist sourcer, such as myself.
I have a contact in Guangzhou, China who can get pretty much anything.
If you would like me to source one for you, then please EMAIL ME watchsauce@gmail.com and I’ll get some prices & images together for you

Watches | Answered on Aug 15, 2019


If it is a new movement you require, email
Me watchsauce@gmail.com and I will discuss options with you.
Would you need it fitting.
If so, prices would start from as little as £18 for a Minota Quartz right up to £175 for a brand new ETA automatic 2836/2 movement. This would include fitting.
I am based in the UK and have over 40 years experience
8_15_2019_12_56_47_pm.jpeg

Caterpillar... | Answered on Aug 15, 2019


Depending on what brand you are seeking, I stock a great many.
The Rolex oyster bracelet being very popular and one of my best sellers.
I can supply bracelets for any watch. If the factory made it, I can get it.
Email me watchsauce@gmail.com
Have added some pics of the Rolex bracelets
8_15_2019_12_51_04_pm.jpeg8_15_2019_12_51_05_pm.jpeg

Ecclissi... | Answered on Aug 15, 2019


Open it up and see what movement is inside, Gucci Buy their movements, as they are NOT watch makers but a fashion designer. I would expect to see an ETA automatic 2836/2 or similar. The ETA is a Swiss made movement, ETA supply movements for many good watch brands, such as Tag Heuer, early Breitling, Raymond Weil, Fortis, Ebel & the list goes on. Very easy to work on and spare parts are easy to obtain. Great work horse movement is the ETA, hence why everyone else uses them, not just Swatch.
Not sure your watch would have a serial number, not all watches have them. Just because you can’t see one or it doesn’t have one, it doesn’t mean it’s fake.
If you pop the back off, take a photo of the movement and send it to me at watchsauce@gmail.com or if you can place it on here, do so, but I’m guaranteed to see it if you email it to me.
Gucci watches are around £400/£600 range, so should be a good solid watch.
Does it sound solid when you shake it? It shouldn’t squeak or rattle too much at that money. The crystal should be AR coated (anti reflective)
Also use a magnifying glass to look at the dial for imperfections, there should be none. QC at Gucci is tight, so look carefully at the dial.
Hope this helps

Gucci Watches | Answered on Aug 15, 2019


The correct battery is SR621SW

Fossil Watches | Answered on Aug 14, 2019


The battery type differs, depending on the movement; what's the model number (on the caseback)?

Michele Watches | Answered on Aug 14, 2019


I'm assuming it's a Gen 3 watch.
These are renowned for this issue, the heat from the charging process softens the glue to such an extent the back detaches.
But the watch is still in warranty, so contact Fossil for a no-charge repair.

Fossil Watches | Answered on Aug 14, 2019


Setting The Alarm Time
This Timex clock radio has dual alarms that can be set and used independently. The initial default alarm settings are 6:00 AM for Alarm 1 and 7:00 AM for Alarm 2. The procedure for setting both alarms is the same.
NOTE: The alarm times can only be adjusted when the clock radio is in the OFF mode. If the radio is playing, press and hold the POWER/MODE button until the display briefly shows 'OFF'
and then reverts to the time.
1. Press and hold the ALM 1 button until the Alarm 1 time and the Alarm 1 Buzzer indicator begin flashing in the display, then release the button.
2. Press the TUN + (HOUR) button to advance the display to the desired wake-up hour. Observe the PM indicator to confirm that you have set the wake-up hour correctly. If the PM indicator is 'On' the wake-up hour on the display is PM. If the PM indicator does not appear the wake-up hour on the display is AM.
3. Press the TUN - (MINS) button to advance the display to the correct wake-up minute, and then release the button.
4. Press the ALM1 button once more to confirm the wake-up time setting or after 8 seconds the display will stop flashing and the new wake-up time will be entered automatically. The display will return to the correct time of day but the Buzzer indicator will remain 'on' in the display indicating that the Alarm 1 is now set to wake you to the buzzer.
5. To change the alarm mode from buzzer to radio, or to cancel the alarm, press the ALM 1 button again. The Buzzer indicator will turn on. Press the ALM1 button once more to select the Radio alarm. The Radio indicator turns on. Press the ALM 1 button once more to cancel the alarm function. The alarm indicators disappear and the display returns to the correct time.
6. Follow the same procedure to set the Alarm 2 wake-up time.

https://cdn.timexaudio.com/media/product/files/T235_User_Manual.pdf

Timex Watches | Answered on Aug 14, 2019


English only.

Watches | Answered on Jul 28, 2019


All I do know is that green means happy, black means sad, blue means excited, and a darker blue means "cool".

The Watches | Answered on Jul 28, 2019

Not finding what you are looking for?
Watches Logo

59,802 questions posted

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...