Watches - Page 6 - Recent Questions, Troubleshooting & Support


where they sell watch bands probably

The Watches | Answered on Mar 07, 2019


Here where we live we have a store that replaces watch batteries. I took mine in and he took the back off and took the old battery out and went to his battery stock and replaced it for me. He did all the work and only charged me three dollars. He has batteries for all makes.

ESQ Watches | Answered on Mar 05, 2019


Sorry, wrong web site.

Fixya doesn't sell clocks.

Seek repair elsewhere.

Regards.

The Watches | Answered on Mar 05, 2019


PULL STEM OUT AND ROTATE IT BACKWARD

The Watches | Answered on Mar 05, 2019


This problem may be due to your analog hands being improperly zeroed. To find out, try this: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero. If you do this and your minute hand points to 1 o'clock, or five minutes, you will know that this is the problem. If this is the problem, you can can correct it by zeroing the hands as follows: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero, or close to it. You should also notice the letters "HR" in the lefthand digital display. This allows you to move the hour hand by rotating the crown. If the hour hand is not pointing at 12 o'clock, rotate it so that it does. 3. Push the top button once. The letters "MIN" should appear in the lefthand digital display. This allows you to move the minute hand on the large dial, and the minute and hour hands on the small UTC dial. Rotate the crown so that the minute hand points directly to 12 o'clock. 4. Push the top button again. The letters "SEC" should appear in the lefthand digital display. Rotate the crown to point the second hand directly at 12 o'clock. 5. Push the crown back into its normal position. Set the digiatl time and date in your tie zone, and your analog hands should match the digital read-out. If the zeroing of the hands is not the problem, I don't know what is wrong with the watch.

Citizen Skyhawk... | Answered on Mar 05, 2019


You need to remove the back plate but this can be tricky without the right tools and you may damage the watch. Take it to a jewellers or watch shop and get them to do it.

Watches | Answered on Mar 04, 2019


HOW DID YOU TURN IT ON ?

Watches | Answered on Mar 04, 2019

Not finding what you are looking for?
Watches Logo

59,448 questions posted

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...