Casio Ceptor - Popular Questions, Answers, Tips & Manuals


i think you have a dud, i would conatct casio directly.
this model is radio controlled so will always set it self to the correct local time , i can only think that the watch is switching off an on causing it to reset the date then when it picks up the signal it resets the time.

Casio Wave... | 610 views | 0 helpful votes


make sure its set to do automatically...or else it needs you to do it manually

I’m happy to help further over the phone at https://www.6ya.com/expert/jovani_c02b023fe087f6cd

Casio Wave... | 233 views | 0 helpful votes

Tip

Performing Watch Battery Replacement


There are different types of watches worn, from the simple, casual designs to the large, Swiss-made pieces of art for the elite. Regardless of the type, they all need routine care and maintenance to keep them running and looking good. One of the best long-term investments you can make in a watch is in battery replacement.

When it comes to watch battery replacement, the first step is to test the battery and ensure that it is the source of the problem. There are numerous watch and battery testers available that will allow you to test watch movement while it is closed.

Once you have determined that the battery is the problem, open the case. As you are proceeding with this process, confirm what kind of battery you have and the correct size replacement you will need. Take a note of the current battery number before you remove it. This will be helpful in case the batter slips out of the case and gets lost. For some batteries, you may need to reset the movement before they can function again.

When you have finished changing the battery, replace the back on the watch before putting it on again.



Certified Watch Repair Battery Replacement MyJewelryRepair com

on Jul 07, 2017 | Casio Wave Ceptor WV57HA-1AV Wrist...


You have to know that analog time "follows" digital time.Any hour/minutes correction on the display has direct effect on time/minutes hands.Some times, mostly after battery replacement,hands might have declination.That is why there is a function so called "Hands home position adjustment".Using this function you can align both hands to 12/00 position.If there is any declination (I think is your case) you can correct.Try to enable this function by pressing for 4-5 sec the upper left button(A) until "HAND SET" appears.If hands are not aligned exactly to 12/00 position, you must correct by pressing the lower right button (D) for forward movement or the upper right button (B) for backward movement.In fact, minutes hand is aligned,hour hand follows.When both hands are set to 12/00 (home position) press button A again.Time Mode returns to the display.Normally hands will now show exactly according to digital (display) time.I hope this will help.

Casio WVA105HDA... | 290 views | 0 helpful votes


I take mine to a watch dealer to get the right, freshest battery from someone with the right tools to install it. Peace of mind.

Casio Wave... | 116 views | 0 helpful votes


take it to a jeweler and they will send it to casio to remove a link. The clip may have movable anchoring points . You need a pin to push in the pins inside the link on both sides. then move the link and re anchor the band under the clip.

Casio Mens... | 149 views | 0 helpful votes


The red circle is the strength of the receiving signal for time calibration! The 3 sectors are to measure the strength of signal! 3 is max strength and 0 is no strength!

Casio Mens... | 178 views | 1 helpful votes


Shortcut battery with AC contact. AC can be found on the sides of watch movement(very tiny). You have to use pointed tweezers: one end on battery+, another on AC contact for three secs.

Casio wave... | 3,164 views | 0 helpful votes


The Casio wave scepter watches often got put on sale because the booklet was thick and the sales staff inside their steel shell stores could never prove how it worked. I bought 3 from Sears at a low price.
Ok, I am in northern ontario, and I set the watch around a non metal tube or box - like a paper towel roll or small pop bottle and set it on a south or west facing window ledge. Works best on a top floor. Position the watch so the 12 is pointing to Fort collins.
My casio at this distance doesn't pick up the radio signal until sometime between midnight and 6 am. It has a setting that reveals if it did sync and reset the time, and will show at what time it sync'ed.
casio watch manuals are available online. As long as you have set what time zone you are in, it will set the time.

Casio Wave... | 167 views | 0 helpful votes


http://support.casio.com/storage/en/manual/pdf/EN/009/qw2735.pdf

Casio WVA105HDA... | 77 views | 0 helpful votes


Read the manual that came with the watch.
The battery could be too low. Try it in complete darkness (closet) and see if there is any glow at all.
Make sure you are pressing the correct button.

Casio Wave... | 86 views | 0 helpful votes


I have a number of these Casio and Citizen watches. This watch does not use GPS for the time keeping. It uses a land based broadcast time signal. There is public information about where the signals come from for your area. The technical breakdown of the time code signal is public access information.

The instruction manual of the watch has the information about when your watch should automatically receive the time signal, and how to set up the watch. Many of the manuals also included a map showing the time signal coverage, and includes the time of day information to show when the signal is strongest.

Make sure the watch settings are for your time zone. This is important. If the main time zone is not for your area it will be trying to receive the signal at the wrong frequency at the wrong time of day. There are areas where the signal may not be able to be received. You can get the mapping for this from the service that the watch has been set to use.

In North America the auto time receive is supposed to take place between midnight 00:00 to 04:00. In the eastern part of North America the reception is poor compared to central and western part of North America. Check the instruction manual for your watch for details.

Below is the spec listing of your watch.

  • Atomic Timekeeping
    Receives time calibration radio signals which keep the displayed time accurate
    Auto receive function (3 times per day)
    Manual receive function
    Signal: WWVB, UK MSF Frequency: 60kHz
  • 50M Water Resistant
  • EL Backlight with Afterglow
  • World Time
    29 times zones (30 cities), city code display, daylight saving auto/on/off
  • Date Alert
    Display flashes when set date is reached
  • 4 Daily Alarms and 1 Snooze Alarm
  • 1/100 second digital stopwatch
    Measuring capacity: 99:59'59.99"
    Measuring modes: Elapsed time, lap time, split time, 1st-2nd place times
  • Hourly Time Signal
  • Auto Calendar (pre-programmed until the year 2039)
  • 12/24 Hour Formats
  • Accuracy: +/-20 seconds per month (with no signal calibration)
  • Battery CR1620
  • Approx. battery life: 2 years
  • Module 2556
Size of case / total weight
WV57 47.0 x 39.0 x 12.5mm / 44g
WV57HD 47.0 x 39.0 x 12.5mm / 89g


btnshopping.gif

Casio Wave... | 358 views | 0 helpful votes


That is a strange question. Usually you set a watch to the current time and date. Use the manual. With the module number in hand, you can visit the Casio world website to download the manual for the module of your watch.

Casio Ceptor... | 302 views | 0 helpful votes


Try this:-

First set the watch to 24 hour format rather than 12 hour format.

Casio Wave... | 243 views | 1 helpful votes


If you are in the US or Canada the signal is coming from Fort-Collins, Colorado. If you are too far or there are atmospheric perturbations along the way, at the times the watch is in automatic receive , the watch may not receive a strong enough signal to synchronize itself with the atomic clock signal. The watch is not always able to do so.
Read the manual where it is suggested that you put the watch on a window sill, the dial facing outward with 12 at the bottom. Do not move the watch when it is trying to receive a signal. If you have a signal strength meter, orient the watch so that the signal is as high as possible.

Casio Wave... | 332 views | 0 helpful votes

Not finding what you are looking for?

-114 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...