Casio Pathfinder - Answered Questions & Fixed Issues - Page 3


What do you need to know????

Casio... | Answered on Jun 28, 2012 | 100 views


Thank you for contacting FixYa.
  • Choose a quiet, well-lit room where you can replace the battery in your Casio Pathfinder watch. Prepare a table, desk or other clean, flat surface where you can perform your watch repair. Put down a soft cloth or piece of craft felt to protect the face of your Casio Pathfinder watch from being scratched during the battery installation process.

  • 2

    Set your Casio Pathfinder watch face-down on the soft cloth or craft felt. Use an optical-sized Philips screwdriver to remove the four screws that secure the watch back to the body of the watch. Set the screws aside, but don't lift the watch back.

  • 3

    Slide the watch back off of the body of the watch very slowly. There are three important springs held underneath the watch back; it is essential to remove the watch back slowly to avoid losing them.

  • 4

    Lift the three springs out of your Casio Pathfinder watch using a small pair of metal tweezers. Take note of the length and placement of the springs as you remove them. Set the springs aside with the other disassembled watch components.

  • 5

    Take the black rubber protective disk out of your Casio Pathfinder to reveal an identically-shaped white plastic disk. Remove the white plastic disk and set it and the black rubber disk aside. Use your metal tweezers, if necessary, to lift out the rubber and plastic disks.

  • 6

    Release the battery strap that holds the battery in place in your Casio Pathfinder watch by pushing the battery strap latch to the left. Remove the old battery from your Casio Pathfinder using a pair of small plastic tweezers.

  • 7

    Pick up your replacement watch battery with the small plastic tweezers and insert it into the battery compartment of your Casio Pathfinder watch. Replace the battery strap and push it gently with the tip of your plastic tweezers to snap the latch in place.

  • 8

    Touch the "-" and "AC" terminals on your Casio Pathfinder watch with the tips of your metal tweezers for at least two seconds. This helps ensure that your watch will work properly once reassembled.

  • 9

    Put your Casio Pathfinder back together to complete the new battery installation. Start by replacing the white plastic disk, followed by the protective black rubber disk. Use your small metal tweezers to replace the small watch springs in their correct locations. Replace the back cover of your Casio Pathfinder, insert the four screws and tighten them with your optical-sized Philips screwdriver.


  • Best regards. Jewel

    Casio Pathfinder... | Answered on May 24, 2012 | 1,924 views


    it may have. most of digital watch has spring inside to connect with the alarm device that is attached at the caseback, put it on its proper position so that the beep, alarm to work properly. i hope this will help you.

    Casio... | Answered on Aug 12, 2011 | 326 views


    Hi,you need to look at the user manual..
    just in case ,if you need soft version of the user manual pls visit the URL below..

    Hope this helps! Take care and please Remember to rate/vote and give me
    4 Thumbs Up for me to continue for Helping out the Community :)
    Thanks

    ***************************
    CASIO Watch User Manual Archives http://world.casio.com/wat/download/en/manual/
    Use this page to download a copy of CASIO watch manuals in PDF format.
    To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

    Casio... | Answered on Jul 02, 2011 | 292 views


    Hi,you need to look at the user manual..
    just in case ,if you need soft version of the user manual pls visit the URL below..

    Hope this helps! Take care and please Remember to rate/vote and give me
    4 Thumbs Up for me to continue for Helping out the Community :)
    Thanks

    ***************************
    CASIO Watch User Manual Archives

    http://world.casio.com/wat/download/en/manual/
    Use this page to download a copy of CASIO watch manuals in PDF format.
    To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

    Casio Pathfinder... | Answered on Jul 02, 2011 | 374 views


    I have done the same , you are not alone and about to try to fix it.has your compass stopped working as with mine

    Casio... | Answered on Feb 15, 2013 | 185 views


    You can do it yourself. Unscrew watch caseback and undo the contact on top of battery. Read the writings on battery and buy exactly the same one. Do not mind manufacturers (Casio, Maxell, e.t.c.), just make sure the numbers are the same.
    Some watch casebacks can be opened only if the watch band is removed, so, remove it if needed, just don't forget to memorize where every part and screw was fitted. Memorize how the battery is fitted and do not put the new one the other way around as this can damage your watch.
    Actually there is nothing difficult - only you have to put everything back exactly the same way as it was. If your watch will be left without battery for more than 3 minutes, you will need to reset your watch after replacing a new battery, but it's easy if you've got users manual.
    Good luck.

    Do not forget to rate, please.

    Casio PRG-40T-7... | Answered on Dec 23, 2013 | 1,747 views


    No is look like a problem.You have the doing the reset after the batery change?

    Casio... | Answered on May 02, 2011 | 104 views


    Make, model, all numbers, please.

    Casio... | Answered on Apr 03, 2011 | 145 views


    Did you change the battery recently? How old is the watch? Does it have moisture inside? Need much more information

    Casio Pathfinder... | Answered on Mar 17, 2011 | 46 views


    You should take it in and have a jeweler look at it. First, make sure all the battery terminals are clean (use a qtip and alcohol). If that doesn't help, have a jeweler help you, it's the easiest way.
    Good luck, and hope this helps.

    Casio PRG-40T-7... | Answered on Mar 03, 2011 | 304 views


    mcdevito75 here, As lomg as the watch band, no matter it"s material fits the watch lugs and your wrist, any band can be used. Your answer is yes.

    Casio Pathfinder... | Answered on Feb 09, 2011 | 326 views


    If you haven't got instructions on how to do this, you can get
    instructions from the Casio web site.

    Go to the casio web site "casio.com".

    Select "support" and the "manuals",
    watches;

    Accept terms

    Select "watch manual archive"

    Read the number of the back of your watch and enter it into the search box

    Casio... | Answered on Feb 02, 2011 | 71 views


    You likely have a dead battery. Follow the instructions on this web site http://forums.watchuseek.com/f43/how-change-ctl1616-rechargeable-battery-41076.html
    it is clear and covers most casio models. Watch closely for the springs when taking your watch apart. You can order the battery online (the best option) but most people that use a standard lithium battery seem to have no problem.

    Casio PRG-40T-7... | Answered on Feb 23, 2011 | 726 views


    Same problem with my SPF-40, module 2273, after a small helical compression spring, silver color, fell out. I could not determine where it is suppose to be located. It could be the barometric reference spring for sensing the barometric pressure.

    Casio PRG-40T-7... | Answered on Jan 16, 2011 | 972 views


    Go to http://www.watch-band-center.com/watchstrap-h243-For-CASIO.html, These people specialise in watch bands and they should be able to provide the one you want.

    Casio Sea... | Answered on Jan 07, 2011 | 446 views


    For all those who lost their Casio watch manual. Follow this link, fill in the requested details and download manual. http://world.casio.com/wat/download/en/manual/

    Casio... | Answered on Nov 16, 2010 | 282 views


    Hi, open the backside, probably the light switch contact at the six side of the watch (attached to the steel mainframe) may have contact with the electronic circuit.... If that does not fix it, remove the batteries and put them back and if the problem still persist, you have no choice than to visit a watch repairer.....

    Casio PRG-40T-7... | Answered on Nov 10, 2010 | 193 views


    I had this problem with the Casio 2926 at midnight for many weeks and no matter which buttons I pressed, it carried on.
    I solved it on my model, by going into alarm set mode (AL) by toggling button on lower left of watch face. Then using button on lower right, cycle through all (5?) alarm options and also check the tiny screen new the rim at top right of watch face marked with SNZ ALM SIG. If a little black box shows up on this screen, switch off the alarm or snooze, by pressing the button on top right.
    Otherwise go to Casio and go through their instructions. The watch is not designed for easy use.

    Casio... | Answered on Mar 29, 2011 | 833 views

    Not finding what you are looking for?

    -4,008 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Casio Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18429 Answers

    Arturs Kalnins
    Arturs Kalnins

    Level 3 Expert

    2338 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Are you a Casio Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...