Casio Pathfinder - Answered Questions & Fixed Issues - Page 6


you can find a mannual experwow gold eur

Casio PRG-40T-7... | Answered on Dec 25, 2009 | 97 views


http://pathfinder.casio.com/support/manual/

find your watch and use the manual. if there is no solution then take it in for repair. any Casio retailer should have repair center information.

Casio PRG-40T-7... | Answered on Nov 22, 2009 | 2,236 views


How do I set the time on my Baby G Sea Pathfinder?

Casio... | Answered on Sep 14, 2009 | 240 views


the mode button controls the different functions of the watch.  time, alarm time, stopwatch, timeset, alarmset, in a repeating cycle.  Make sure you are on the time function (seconds ticking and changing every second, but not flashing twice per second.  This is the normal mode that shows the time.
 A press of the lap/reset button (labeled) will show the alarm time, Unpress will show the time of day. Press again toshow the alarm time. Press and hold the lap/reset button will show the alarm time again, but it will hold there.  While holding this lap/reset button, press the start/stop button (labeled). This will turn on (or off) the alarm (tiny indicator).  Press this start/stop button repeatedly (while still holding the lap/reset button and you will see the indicator turning on and off with each press.  Stop this button pressing with the indicator OFF, let up on the lap/reset button, and the time will return to the screen.  The alarm will now be OFF. 

Casio... | Answered on Sep 09, 2009 | 858 views


i have a spf40 casio, all is ok but interior display damaged viciorici@gmail.com

Casio... | Answered on Aug 15, 2009 | 526 views


If you see no screws holding the contact (metal frame), that means the contact is clip-on. Take an eyeglass and examine all contact legs carefully- you will find out where it is clipped on. Use fine pointed tweezers to pull contact legs and undo it.

Rate, please.

Casio... | Answered on Jan 10, 2010 | 664 views


here is the link:

http://world.casio.com/wat/download/en/manual/

Rate, please.

Casio PRG-40T-7... | Answered on Jul 09, 2009 | 322 views


Tools are available from many watch suppliers, one is Jules Borel, jborel.com, best to get a new gasket and mabey a spare if you wear this in the water then a new crown or crown seal also.

Casio... | Answered on Jun 14, 2009 | 587 views


No need to buy a new watchband friend, you need a new pin. The spring inside the pin has lost its elasticity ... you won't spend a fortune ....

Please rate the resolution.

Casio Pathfinder... | Answered on Mar 18, 2009 | 183 views


Hi, If you buy some new batteries - i.e. from ebay (very cheap) and replace the old ones - or take tyhe watch into a jewellers and get them replaced (appx. £15) this should do the trick. The batteries should be replaced every 2 years.

Casio PRG-40T-7... | Answered on Feb 20, 2009 | 522 views


Don't forget that the altimeter is barometric, and therefore the altitude reading will change depending on the air pressure - i.e. the weatherman may give the 'high pressure coming through' or that there is a low pressure giving rain - to get the true altitude, you need to know the true air pressure at any given point on the earth ~(where you are) then set this as the 'normal'. you will then get the correct altitude. Don't forget that if you are in a pressurised aircraft - as in allcommercial flights, the cabin air pressure is artificially kept at appx 4000-6000ft altitude

Casio PRG-40T-7... | Answered on Feb 20, 2009 | 224 views


There is a very small sticker with very small red print just adjacent to the battery compartment. This little sticker states "once batteries are replaced, you need to touch AC with tweezers". I did it with metal tweezers and the watch display came to life. Good luck!

Casio PRG-40T-7... | Answered on Feb 19, 2009 | 1,273 views


Hold down mode (bottom left) for about 5 seconds and it should come good.
Good luck

Casio... | Answered on Feb 16, 2009 | 313 views


Hold down the adjust button (top right) and flick through with mode (bottom left) when you are done hit adjust again and it will take you to the next 'page' of settings. Same deal there. Use the top and bottom left buttons to change number up or down

Good luck

Casio... | Answered on Feb 16, 2009 | 191 views


here is the link for very complete manual:

http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2271.pdf

Download it and follow the instructions how to set and reset the altimeter and other features of your watch. Use zoom or magnifying tool, as the document originaly has tiny script.
Do not forget to rate please.

Casio PRG-40T-7... | Answered on Feb 09, 2009 | 1,708 views


If this is screwback, then there should be grooves for inserting case opener claws. For this yoy need case opener with interchangeable claws. You can buy it on ebay for approx. £7.00.
If the casebask is snap-on, then there shouldn't be any grooves, just small opening (lip) between the caseback and case. This is exact point where the watchmakers knife blade must be inserted and pryed up.
Do not forget to rate, please.

Casio... | Answered on Jan 26, 2009 | 2,043 views


The best way is to take a look on ebay. The only downside is: you have to buy a whole lot (I mean - you can not buy just a two or three springpins). Go to ebay, choose jewellery and watches and then watch parts and tools or accesories.
The other way is to try to find on internet jewellery and watch part supplyers in your coutry and contact them. They usually selling springpins in packs of 10.
Before you buy any of them, you need to measure the distance between watch case lugs in milimeters. The size between lugs is the exact size for the springpins to order.
If you are not happy with that, then you have to try to continue to visit more jewellers till you find the right ones.

Don't forget to rate, please.

Casio Sea... | Answered on May 12, 2009 | 1,069 views


There is this little spring which fits in one of the small holes in the watch. When I tested my watch without the spring, there was no beep. With the spring in place the sound worked nice again. So (IMO) apparently the little spring is used as contact between the watch en the "speaker" placed at the back of the watch.

regards,
Pieter

Casio PRG-40T-7... | Answered on Dec 21, 2008 | 769 views


If there is no any screws holding that 'metal strap' then carefully check both ends of it. You will notice that the ends (or one end) are snaped over the little plastic hooks. Take pointed tweezers and push that end outwards (away from battery) and the contact (metal strap) will pop out.
After battery replacement, just push the contact back into place till it fixes.
If there are screws holding the contact, just undo them.
Be quick when replacing battery- you have 2 or 3 minutes to do that, otherwise all data will be lost and you will need to reset watch completely.

Casio PRG-40T-7... | Answered on Dec 20, 2008 | 385 views

Not finding what you are looking for?

-4,008 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...