Chamberlain Televison & Video - Recent Questions, Troubleshooting & Support


Board worn or a loose wire..new batt...

Chamberlain... | Answered on Jan 12, 2019


I would contact the support staff for the product directly.

Chamberlain... | Answered on Jul 06, 2017


Hmm tricky situation try unplugging it for atleast 2 hours and remember any device usually handles one code at a time so if your using two remotes together with different codes that will happen thats pretty much all i can think of at moment

Chamberlain... | Answered on Apr 26, 2017


now you need to program remote too

Chamberlain... | Answered on Jan 17, 2017


THE NEW REMOTE MAY NOT BE THE CORRECT SYSTEM FOR THE UNIT YOU HAVE.
THE ONE THAT DOESN'T WORK MOST LIKELY NEEDS A NEW BATTERY.
NOTE IT MUST BE REPROGRAMED AFTER CHANGING THE BATTERY

HOPE THIS HELPS

Chamberlain... | Answered on Dec 03, 2016


If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls.

Chamberlain... | Answered on Aug 17, 2015


Have you checked the proper polarity?

Chamberlain... | Answered on Aug 12, 2015


Check and replace the loading belt. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Chamberlain... | Answered on Mar 12, 2015


You will probably have to speak with someone at the HOA that has access to the gate opener. That is the only way to be able to program anything to it.

Chamberlain... | Answered on Feb 24, 2015


Press an hold the learn button on the garage door opener for 10 seconds. You will notice an amber LED either next to or above the learn button. When the LED goes out the anything that was previously programed will be deleted. Now press and release the learn button once the amber LED will come on steady. Now press the button on the garage door opener you want to program to the garage door opener. You will hear a click and the light bulb on the garage door opener will go off and come back on. Your garage door opener remote is now programed with a new code.

Chamberlain... | Answered on Feb 24, 2015


Hi... You have to "erase all codes" (you can read that section of the manual and teach the opener to use the remote using a new code. You can get the manual at the Craftsman site, page 35. Essentially you do this: access the reset button n the back right of the motor, press and hold the 'learn' for 6 seconds or more,until the learn light goes off. TO reprogram it, press the learn button until the light goes on, then within 30 seconds, press and hold the desired button of the remote. Voila!

Chamberlain... | Answered on Dec 27, 2014


Open it up remove the battery and let everything dry out completely. Put it back together when dry and it should work.

Chamberlain 373p... | Answered on Nov 01, 2014


Check the remote control for its infrared emission. Check it with fresh batteries. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
If some button/s seems do not respond, it will be best to buy an other remote control, rather than repairing this damaged one.

Chamberlain... | Answered on Sep 15, 2014


sounds like your battery is needing replaced. the front bottom slides down this will expose the battery cavity it will take a 9 volt (rectangle shaped)

download free pdf manual from here.

http://www.liftmaster.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A2924.pdf

Chamberlain... | Answered on Sep 01, 2014

Not finding what you are looking for?
Chamberlain Logo

99 questions posted

Ask a Question

Usually answered in minutes!

Top Chamberlain Televison & Video Experts

Raj Patel

Level 3 Expert

996 Answers

The Knight
The Knight

Level 3 Expert

76016 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Are you a Chamberlain Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...