Craftsman Logo

Craftsman Recent Questions, Troubleshooting Help & Support

  • 1K Products
  • 84K Answers

the usa sears website doesnt recognize either of those numbers...

Craftsman Drills | Answered 23 hours ago


Craftsman Garden | Answered Yesterday

I have found some hard to find items on EBAY and have posted on Craigslist wanted section to find needed items. Craigslist is more local so you might want to post in numerous cities or states. Good luck!

Craftsman Saws | Answered on Sep 10, 2019

Most transaxles will have a disc brake on the side, if the brake is binding on the disc this will slow it down, on the side of the axle there will be a nyloc adjuster nut, by turning this anti clockwise you will free the brake.

Craftsman Garden | Answered on Sep 08, 2019

Go to they have a free download for this model.

Craftsman Garden | Answered on Sep 08, 2019

no, wire maybe. Sounds like a little housekeeping is in order. motors are a magnet for loose strings.

Craftsman Drills | Answered on Sep 05, 2019

There should be 2 support brackets on each side that hold the belt in place and stop the belt from oscillating. Make sure the brackets are there and the belt is resting in them and you have the belt in the tensioner correctly.

Craftsman Garden | Answered on Sep 05, 2019

What will replace Sears 5-23 snowblower auger grease ronex ed#1

Craftsman Garden | Answered on Sep 01, 2019

Sears Parts Direct shows the parts diagram on page 24 of the user manual for the 247.770130. The parts list starts on the next page. The manual is available here: .The direct link to the PDF version of the manual is currently . You can also find the parts diagram here: .

I hope this helps.

Cindy Wells

Craftsman Garden | Answered on Aug 25, 2019

It should be pretty straightforward. What are you looking for ?

Craftsman Air... | Answered on Aug 21, 2019

Without seeing it in person. I would be sure fuel is not restricted by a clogged filter or varnish and debris in carb. Check vent in fuel cap , it must have one. Some engines can have a valve stick when hot, usually the exhaust valve, it will turn over very freely . Then next would be a faulty ignition module/coil.

Craftsman Garden | Answered on Aug 20, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Craftsman Experts

John Trevino

Level 3 Expert

1420 Answers


Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Craftsman Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides