Dymo Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

New versions of the Labelwriter 400 (original and Turbo) do not take Generic Labels. It is an issue with the firmware Dymo have installed - it will only relabelwriter400.jpgad the genuine labels made by Dymo. currently there appears to be no work around to solve this isses.
The Dymo OEM labels have lines print on the back, if you use labels without these lines, the printer gives an "out of paper" error
The only printers in the Dymo Range that will take our generic labels are the Dymo Twin Turbo and the Dymo Duo (both the more expensive from the range).
Dymo have only made this change in the last 6-8 months, old 400's will work with cheaper generic labels

Dymo LabelWriter... | Answered on Sep 10, 2019

There may be a small piece of label cutting stuck in the gears. remove the label cartredge, you will see a white gear set between the pinch wheel and the print head. Use a micro drive or something strong and give the gears a little help while pushing the print button. You may have to do this several times. Be careful not to use too much force as this may knock a tooth off. Good luck. My Dymo continues to print prefet labels.

Dymo LetraTAG... | Answered on Sep 04, 2019

I'm not sure you can actually print the labels from Quickbooks, but can print address labels, etc. to use with Quickbooks invoices, etc. you will actually have to print the labels from within the label software.

Dymo LabelWriter... | Answered on Aug 27, 2019

The software strips out blank lines from labels with Address blocks on them. Try using a label with a text block instead.

Dymo LabelWriter... | Answered on Aug 19, 2019

do you mean to replace the labels or to work on the internals? take it apart means different things depending on what you are trying to access.

Dymo Office... | Answered on Jun 15, 2019

Open the printer and clean the rubber rollers with alcohol

Dymo Office... | Answered on Apr 18, 2019

Google is your friend in such cases

The minimum value for bytes per line is 0. If the bytes per line are set to 0, the printer will print one blank line every time it receives a character.

Programmers manual page 23

The user guide mentions nothing so it is down to programming. An easy way would be to insert a period, on the blank line.


Dymo Office... | Answered on Mar 19, 2019

If you have a DYMO LETRA TAG XR:

Press SHIFT + B key (simultaneously)
Choose 1 / the first option (no border)
Press ENTER key

Dymo LetraTAG... | Answered on Mar 19, 2019

You do not., anymore than you can stop a document while it is being printed, mistake an all

Dymo Office... | Answered on Mar 07, 2019

My works Dymo LabelMANAGER 210D broke down because of a weak construction. The tape cartridge door pulls via a spring the print head towards the roller. Its plastic lever couldn't handle the strain. I repaired it with a peace of locking wire, as you can see on the picture. Greetzzzzz Arno

Dymo... | Answered on Feb 18, 2019

Not finding what you are looking for?
Dymo Logo

1,319 questions posted

Ask a Question

Usually answered in minutes!

Top Dymo Office Equipment & Supplies Experts


Level 3 Expert

85178 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Are you a Dymo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides