Electrolux Washing Machines - Recent Questions, Troubleshooting & Support


see if belt under unit bad or agitator cogs under agitator first see if pump and hose ok

Electrolux... | Answered 3 days ago


remove agitator and see if cogs are bad or plastic plate with screws gears under are probably bad

Electrolux... | Answered 3 days ago


Hi try unplugging the machine for ten minutes this sometime resets the computer inside.

Electrolux... | Answered on Oct 06, 2019


Tray to drill another holes below the originals and cut ribs of old ones to put springs on. If not take 8 awg copper wire, band like hook, and glue down on casing with a two-component epoxy.

Electrolux... | Answered on Oct 02, 2019


Hi Douglas Haskell, I know you will laugh at this but try Coke a Cola. Fill the Drain Pump Hose with Coke and let it Soak overnight.

Or CLR might help also
https://www.woolworths.com.au/shop/productdetails/74394/?istCompanyId=909b5da6-e33c-4de8-a6e2-0861c4cbcd86&istFeedId=c54e05d9-bacb-45a1-aa5a-c48531ceab7d&istItemId=wrimlwmml&istBid=t&cmpid=smsm:ds:GOOGLE:Woolies_SmartShopping_Home%26Outdoor:PRODUCT_GROUP&gclid=EAIaIQobChMIwv6B28fl5AIVgoBwCh3mrAZAEAYYASABEgL6iPD_BwE&gclsrc=aw.ds
I have not got round to it but I am planning to use Coke on my toilet to clean the calcium sediment under the water line.

Electrolux... | Answered on Sep 22, 2019


Replace doorlock.
The the power plug on the main board to the lock for burns or signs of heat.
If its okay, replace doorlock, and you are good to go.

Electrolux... | Answered on Sep 10, 2019


The main board in defective.
Not able to boot

Electrolux... | Answered on Sep 10, 2019


Water intake fault.
Could be: low water pressure, faulty water valve, faulty pressureswitch.

Electrolux... | Answered on Sep 09, 2019


Drain problems. Blocked pump or drian hose

Electrolux... | Answered on Sep 09, 2019


Drain problems. Blocked pump or drain hose

Electrolux... | Answered on Sep 09, 2019


Loud buzz is likely to be from the motor, due to a failed start / run capacitor. mention this to the service engineer when you call, so that he can bring the replacement with him, and avoid a return visit.

Electrolux... | Answered on Sep 07, 2019


There is problem with intake water.
Could be: inlet valve, wiring, control board

If in other programs it takes water then I would eliminate the control board and I would suspect that it is a faulty winding of the intake valve or wiring between the control board and the intake valve.

Dado

Electrolux... | Answered on Aug 14, 2019

Not finding what you are looking for?
Electrolux Logo

2,377 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

371 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...