GMC Logo

GMC Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 709 Products
  • 190K Answers
  • 4M Views

No.
There's a connector at the gearbox.
There's a connector at the rear lights
& there's a connection at the fuse box, but that one may be a general live feed, so may not be helpful to you.?

GMC Cars &... | Answered 2 hours ago


A few things to check would be the coolant temp sender, TPS sensor and last but not least check for a vacuum leak. These are just a couple things off the top of my head.

1996 GMC Yukon | Answered 2 hours ago


Try stepping on the brake when trying to shift with the key on. Then try starting im neutral or other gears to see if the neutral safety switch is bad in park. You may have a bad wire from the battery to power distrubution or bad ground. So many things it could be.

2004 GMC Envoy | Answered 2 days ago


MOST LIKELY SOME FRONT END PART IS WORN OUT

GMC Cars &... | Answered 2 days ago


You might, but if you did attempt it you would mostly end up wishing you hadn't. Sliding sunroof repairs are best left to those skilled and experienced...

GMC Cars &... | Answered 3 days ago


most relays are located in fuse box, some cars have more than 1 fuse box in them.

GMC Cars &... | Answered 3 days ago


there should be a panel on the inside side of the tailgate with screws, remove panel to gain access to the latch assembly u have a rode off or bent

GMC Cars &... | Answered on Sep 12, 2019


try opening google and type in what you need or looking for,

GMC Cars &... | Answered on Sep 12, 2019


Sounds like shift cable adjustment has slipped...

GMC Cars &... | Answered on Sep 11, 2019


Your vehicle has a PCB - relay . Printed circuit board relay . Soldered directly on the circuit board inside the under hood fuse box . You could unsolder the the relay an solder in a new one , how are your solder skills ? Your could also buy a regular relay an socket an find a wiring diagram so you know what wires to cut an splice the new relay socket too.

GMC Cars &... | Answered on Sep 10, 2019


The 2010 GMC Sierra does not have a separate flasher. The turn signal function is built into the body control module. You cannot replace the flasher alone. If you have a scan tool, you can connect to the DLC and see if the turn signal switch command is being received by the BCM.

GMC Cars &... | Answered on Sep 09, 2019


It should come with the replacement kit, or try Google or UTube..

GMC Cars &... | Answered on Sep 08, 2019


Do you hear fuel pump coming on ?

2000 GMC Safari | Answered on Sep 04, 2019


This scenario could be something as simple as just the exhaust vibrating at a certain time or engine speed and vehicle speed not matching at a point and then the exhaust vibrates against the underside of the floorboard because it is so close to the floor.

2003 GMC Yukon... | Answered on Sep 01, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,173 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

2002 GMC Envoy
2002 GMC Envoy

1,364 Questions

2003 GMC Envoy
2003 GMC Envoy

1,326 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,100 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...