Hitachi Televison & Video - Page 9 - Recent Questions, Troubleshooting & Support


Just take the battery out from its compartment. The remote control will reset itself. Insert the batter after some time.
http://remotesearch.blogspot.com/

Hitachi... | Answered on Jun 17, 2018


It does sound to me like the T-Con. If you can change the channels even though you can't see the picture then that's is a T-Con problem. Especially as you can see the lights. Before replacing any of the boards check for bad solder joints and poor connections between the boards, as the TV does sometimes function right.

Hitachi... | Answered on Jun 12, 2018


I have same problem in my a/ c does anybody knows how too repair. It

Hitachi... | Answered on Jun 12, 2018


Open internal fuse or power supply failure

Hitachi... | Answered on Jun 10, 2018


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts./

Hitachi... | Answered on May 28, 2018


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand.
http://electro-medical.blogspot.com/

Hitachi... | Answered on May 22, 2018


Sound Like the light engine has gone bad Model # is UX27716 link below, couldnt find many more searching this

http://salestores.com/hitachiux27704.html#.WwIhpUgvwXI

Hitachi 62VS69... | Answered on May 21, 2018


You have this backwards. The applicable code will be in the Xfinity universal remote control.

Hitachi... | Answered on May 12, 2018

Not finding what you are looking for?
Hitachi Logo

13,546 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76100 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...