HP OfficeJet - Recent Questions, Troubleshooting & Support

Hi there you can try this.
Not sure if this will work that well for you but this is what I found worked for me.
  1. Start
  2. Control panel
  3. Printers
  4. Double click your printer
  5. See the jammed jobs in there
  6. Click Printer
  7. Click Cancel All Documents
  8. Wait about a minute, should hear your printer cooperate again
If you are on Vista Home Premium, go through the following steps to clear "deleted" print jobs from the print queue.

1) Go to Control Panel
2) Select System and Maintenance
3) Select Administrative Tools
4) Double-click on Services
5) In the list of services, scroll down until you find one called "Print Spooler"
6) Right-click on "Print Spooler" and select "Restart"
7) The "deleted" jobs will disappear and any queued jobs in your print queue will print

Hope this helps. I figured it out on my own without any assistance from the paid professionals.

Cant say if it will work so come back let us know so other can use this thanks.

All The Good Luck. Pineworks

HP Officejet... | Answered 4 hours ago

you must go to control panel of the windows.. then find and click add remove programs.. try to check if any of the printer component are installed.. the remove it.. here's how to install the printer.. 1st don't connect the usb cord to the pc.. then install it.. when the program was searching for the pritner then put the usb cord of the printer.. then so on.. try... ^^

HP OfficeJet... | Answered 2 days ago

I managed to track down some information that may be able to help you. Power off your printer, then press &hold buttons while powering on. If it doesnt reset then unplug it & press & hold buttons while plugging it in.
# & 3 Partial reset
# & 6 Semi full reset
# & 9 Full reset
A full reset will clear any stored information in th printer, speed dials ect. So always start with a partial reset and work your way up.
I hope this helps.

HP Officejet... | Answered on Jun 05, 2019

call for Free printer Support. Call Toll Free Phone Number - 877-690-9305
hp printer support -3-5y1xerifmav3c1grzoip5vgk-2-0.jpg

HP Officejet... | Answered on Jun 04, 2019

Ahhh. A fellow OfficeJet 4652 owner. I own one too. In your print driver, you want to click quality, and then normal.

HP OfficeJet... | Answered on May 31, 2019

This issue may cause due to the following reasons.
1. Unlocked rear access door.
2.Dirty paper feed rollers. Over time, paper fibers and dust will stick to the rollers
3.Partially installed paper tray.
4.The paper is being pushed in too far.
However, to resolve the issue I have included the troubleshooting steps, which are ranked by simplicity and probability of success.
We truly appreciate the trust that you have displayed in us and our service and assure you that we will certainly live up to your expectations.
Solution summary:
* Paper jam (article)
* Supported paper
* Check the size of the paper / check with different paper
* Check the number of sheets loaded
* Cleaning the rollers
* Power cycle
* Connect directely to wall out let
* Semifull Reset

Paper jam:
Instead of sending this document in a text format, we are referring you to the Web link clearing the paper jam, where this information is easier to read with graphics.
NOTE: Clicking the link above may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
Supported paper:
Instead of sending this document in a text format, we are referring you to the Web link for using the supported paper, where this information is easier to read with graphics.
NOTE: Clicking the link above may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
Check the size of the paper/ check with different paper:
Ensure, that you are using correct size, and thickness of the paper, if the error message still appears, check with other paer.
Check the number of sheets loaded:
Ensure, that minimum number of sheets are load, try to load single sheed and try printing.
Cleaning the rollers:
1. Unplug the printer power cord and remove the back door.
2. Wipe the paper rollers with a lint-free cloth lightly moistened with distilled or bottled water. Rotate the rollers with your fingers to clean all the way around.
3. Allow the rollers to dry completely, then close the rear door.
4. Open the print carriage access door.
5. Use a soft cotton swab dampened with water to clean the four small metal paper rollers. Avoid touching the encoder strip. The illustration below shows the relative locations of these parts.
6. Use a clean, dry cotton cloth to wipe the carriage rod. Move the carriage as needed to clean the full length of the rod. Do not lubricate the rod.
7. Close the printer, plug the power cord in, and turn on the printer power.
8. If the error message does not go away, you need to get the printer serviced.
Power Cycle:
Follow the steps below to power cycle your all-in-one:
1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
2. Wait 30 seconds.
3. Plug in the power cable to All-in-One and also to wall outlet.
4. Check for the functionality.
Connect directely to wall out let:
The surge protector may not supply sufficient power to the printer. To isolate the issue please remove the power plug of the printer from the surge protector and connect it to the wall jack directly.
Being a All-in-One Machine it needs full voltage to be supplied while initializing Surge protectors supply suppressed voltage to the printer which leads to unexpected issues in the printer
Semifull Reset:
A semi-full reset will do the following:
The user settings to the factory defaults, Language and country settings on some models, Fax logs, Fax headers, Fax speed dial information.
Reset the All-in-One to the factory default settings by using these instructions:
1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.
2. Then, press and hold # and 6 while plugging in the power cord.
Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.

Now check the functionality,
Please feel free to reply us. It is our responsibilityto serve our esteemed customers like you in the best possible way. We appreciate your support and cooperation.
We value our esteemed customers and your satisfaction is very important to us. Customer service and satisfaction are at the top of our corporate goals.
We are always available round the clock to assist you technically regarding the problems you may experience with All-in-One.

Thanks & regards

Pradeep Kumar

HP Officejet... | Answered on May 20, 2019

You can replace the print heads in the printer itself.
I know that you can order them from HP's website, or eBay for that matter.

They are running around $120 on eBay, so they are most likely a lot more on HP's site.
Unless you paid an arm and a leg for this printer or if it has sentimental value, it's time to replace it.

HP Officejet Pro... | Answered on May 18, 2019

usually setting your computer to a date before the expiration date of the cartridge. If your printer has a date function try this first on your printer.

HP OfficeJet... | Answered on May 15, 2019

Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English).

If you need more help come back.

Post / thumbs / testimonial are welcome!

HP OfficeJet... | Answered on May 14, 2019

Check the status of the printer at Control Panel. Set it to online if it's shown as offline. If this doesn't fix the problem, check whether installing the vista driver available at your printer manufacturer's website helps.

Step 1:
a. Click Start, go to Control Panel and select Hardware and Sound.
b. Click Printer.
c. If the Printer is offline, it shows "Offline" status. If the Printer is online it shows "Ready".
d. If the Printer is offline, set it to online.
e. Right-click on the printer and select "Use Printer Online".
f. The display should change to ready when the printer is set to online.
Read More....
How to Fix an Offline Printer eHow and HP Printer Support


HP Officejet Pro... | Answered on May 08, 2019

HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....




HP Officejet... | Answered on Apr 25, 2019

Windows users: Turn on printer.....
In the HP Solution Center, click Settings, point to
Print Settings, and then click Printer Toolbox. Click the Estimated
Ink Levels tab.
Mac users:
In the HP Image Zone, click the Devices tab. In the Select Devices area, click the icon for your HP All-in-one. In the Device Options
area, click Settings, and then choose Maintain Printer. If prompted, select your HP All-in-one, and then click Utilities.
Hope this works for you....Eye

HP Officejet... | Answered on Apr 11, 2019

Please open the URL and download the manual of HP Officejet Pro 8500. URL - http://h20195.www2.hp.com/v2/default.aspx?cc=us&lc=en&oid=3752454

HP Officejet Pro... | Answered on Mar 18, 2019

Not finding what you are looking for?

-4,385 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • Forum

View Most Popular

  • HP Office Equipment & Supplies