Husqvarna Sewing Machines - Page 6 - Recent Questions, Troubleshooting & Support


It looks like there are a few stitches among the quilting stitches (Row 2) that are blanket stitches; these are all stitches with a stitch to the left and a line of straight stitch. Stitch patterns 16, 17, and 18 are the ones to check out. Stitch 17 might be closer to the look of a hand-sewn blanket stitch. Stitch 16 has two straight stitches for every stitch to the left. Stitch 18 has a one to one ratio of stitches to the left for every stitch to the left.

You can see the stitches available on the Husqvarna Tribute 140C on the product page: http://www.husqvarnaviking.com/en-US/Machines/TRIBUTE-140C . The direct link to the list is here: http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Stitches/Tribute_140C_stitch_overview_EN.pdf?ext=.pdf . These stitches are also shown starting on page 44 of the manual, http://www.husqvarnaviking.com/getattachment/Machines/TRIBUTE-140C/Tribute_140C_manual_EN_B.pdf.aspx .

I hope this helps.

Cindy Wells

Husqvarna Sewing... | Answered on Nov 13, 2018


I can't promise any will be free
husqvarna customer service or a dealer
ebay
sewingpartsonline.com
sewusa.com
sew4less.com
sewvacdoctor.com
premiersewing.com

Husqvarna Sewing... | Answered on Oct 20, 2018


well the question is
do you want the machine to do something different to what you are doing now
It has lasted for 18 years and you must be happy with the way it has been working
Maybe all it needs is a good service from an authorized service agent to have any worn bushes /parts replaced
Machine today are smarter , fancier but far less reliable than older machines

Husqvarna Sewing... | Answered on Oct 11, 2018


Very possible the needle is old, damaged, or the incorrect type for the fabric. Sometimes a straight-stitch needle plate can be used on a machine that will prevent the fabric from going down through the hole. But try a new needle first. Make sure you are using the correct type of needle for the fabric you are sewing--sharp for woven fabric, ball point for knit.

Husqvarna Sewing... | Answered on Oct 05, 2018


Try switching it off and unplugging the power socket. After 5 mins plug back in to the socket and switch it on.
If that does not fix it, its a circuit board fault.

Husqvarna Sewing... | Answered on Sep 22, 2018

Not finding what you are looking for?
Husqvarna Logo

3,959 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...