Husqvarna Sewing Machines - Page 8 - Recent Questions, Troubleshooting & Support


Order the model 750 repair manual directly from Husqvarna.

Husqvarna Sewing... | Answered on Jul 13, 2018


Most unlikely. Corporations cease to update machines after a period of time as there is no financial benefit to do so and it is expensive and difficult to do with so many machines on the market. Your best chance is probably using a computer with XP or perhaps set the computer to run those sewing programs using XP (if possible).

You may want to talk to your local dealer about options.

Husqvarna Sewing... | Answered on Jun 24, 2018


There probably are some plastic tabs holding it in place, (much like a laptop computer case) You'll need a couple thin screw drivers to carefully release those

Husqvarna Viking... | Answered on Jun 16, 2018


Sorry, I could not find specifics for your particular machine. However, in the comment section below this video, the statement is made that if the button is too large, then the old fashioned way of making buttonholes would need to be used:


Husqvarna Viking Emerald 183 Buttonhole Tutorial

Husqvarna Sewing... | Answered on Jun 15, 2018


Do you mean the symbol above the scissors on the infodisplay? If that is the blinking indicator, then the top thread has broken or the spool is empty. If the top thread continues to break, then the problem could be the age of the thread or the thread catching on a spot on the spool. (Thread degrades under most light. So the time it was on display at the store or sitting in your sewing area can be a factor.) Check the spool for rough spots. Make sure that the top thread is threaded correctly. Try a new needle; sometimes the eye of the needle can have sharp burs or edges. Check the top thread tension. Look at the hole in the stitch plate; if it is chipped or damaged, replace it. A damaged stitch plate can also cause breakage of the bobbin thread.

Husqvarna Viking has the manual for the Rose 600 on the machine support page: http://www.husqvarnaviking.com/support/ROSE-600 . The direct link to the manual is http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Rose_605_manual_EN.pdf . See page 10 a picture of the top thread icon. See page 56 for the trouble-shooting guide. A stand-alone trouble-shooting guide here is also available: http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Rose_605_Troubleshooting_EN.pdf . Husqvarna Viking uses same manual for the 600 and the 605.

I hope this helps.

Cindy Wells

Husqvarna Sewing... | Answered on Jun 12, 2018


Make sure to install a brand new needle. If that doesn't help, then it's possible the machine has been slightly knocked out of time. Take it for service.

Husqvarna Sewing... | Answered on Jun 09, 2018


Hello Minnie
Here is a link to a YouTube on how to wind a bobbin:
Viking 1200 Husqvarna 1 Bobbin Winding
and more information in the User's Guide (manual) available free to download at
http://manuals.husqvarnaviking.com/

Please give me a thumbs up if this was useful, otherwise please send me mote details on the challenge.

Happy Stitching
Sewingirl/

Husqvarna Sewing... | Answered on Jun 06, 2018


Search for:

Make Model manual

Husqvarna Sewing... | Answered on Jun 06, 2018


Hello Fran
To set stitch length and width:
1. Select the stitch in "Stitch Men"
2. Set the preferred stitch length and width in "Sewing Information Menu"
Both of these are shown on page 4:2 in the User's Guide which can also be downloaded for free from:
http://www.husqvarnaviking.com/SiteMedia/Products/Machines/DESIGNER-TOPAZ-40/Manual/Topaz40-manual-EN.pdf

To guide the fabric so the stitching is consistently at the same distance from the edge, use the markings on the throat plate .... the metal plate around the clear bobbin cover. Alternatively there a number of accessory feet which guide the fabric for that perfect stitching. You may want to refer to the Accessory User's Guide found at http://www.e-magin.se/latestpaper/03g36b4g/paper#/paper/32b63734/1
Have a look at such feet as:
- clear seam guide foot
- edge stitching foot
- edge / guiding foot
These are the most often used, although there are others, depending on the need and application.

Please give me a thumbs up if this was helpful. Otherwise please do send me more info on your specific challenge.

Happy stitching
Sewingirl/

Husqvarna Sewing... | Answered on Jun 06, 2018


Very possible the machine has seized. They tend to do that when stored with no activity. Take it for service.

Husqvarna Sewing... | Answered on Jun 06, 2018


The standard setting when the machine leaves the factory is the midway point between high & low number. However, over time with use, that setting may shift. The ideal tension setting for your machine is when the top and bobbin threads meet in the middle of the fabric.


threads sewing machine tension Google Search

Husqvarna Sewing... | Answered on Jun 06, 2018

Not finding what you are looking for?
Husqvarna Logo

3,959 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...