Husqvarna Sewing Machines - Popular Questions, Answers, Tips & Manuals


Go line and type it in or go to eBay and type in the piece you need. They come in different shank sizes but are very reasonably priced so you could get a couple until one that fits your machine. You can always gift the ones you don't need. :-)

Husqvarna Sewing... | 21 views | 0 helpful votes


If the needles are in right, and it still won't form a stitch, then you'll need to take it to

Husqvarna Sewing... | 27 views | 0 helpful votes


The Husqvarna Designer Ruby can read a number of embroidery file formats: .SHV, .DHV, .HUS, .VIP, .VP3, .PEC, .PCS, .SEW, .JEF, .EXP, .10*, and .DST. One other embroidery file format is accepted. See the manual. It can read the .SH7 stitch format files and .VF3 embroidery font files. It can also read .HTM/ .HTML and .TXT files. With the complimentary 5D software (or a similar package), you can convert most other embroidery files to one that is compatible with the Designer Ruby.

The documentation for many Husqvarna Viking sewing machines is available here: http://www.husqvarnaviking.com/Support . The manual and other useful information for the Designer Ruby is here: http://www.husqvarnaviking.com/support/DESIGNER-RUBY . The current link to the manual is http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_Ruby_manual_ENG_A.pdf?ext=.pdf . The file extensions are listed on page 9:2 (page 100 of the PDF).

I hope this helps.

Cindy Wells
(I will admit to mostly using the .HUS files with the Designer Ruby.)

Husqvarna Sewing... | 48 views | 1 helpful votes


Hello Don

Husqvarna Ruby features "editing" in sewing mode and in embroidery mode. Both are well described in chapters 5 and 7 respectively. A free downloadable manual is available at this link.
http://www.husqvarnaviking.com/SiteFiles/ClientSite/41/4141cec3-ad2c-4ccd-abb4-198574a6e14f.pdf

Happy Stitching
Sewingirl/

Husqvarna Sewing... | 22 views | 0 helpful votes


This presser foot, https://www.sewingpartsonline.com/open-toe-free-motion-spring-foot-4130376-46.aspx , should be compatible with the Emerald 203 and 183 for free motion quilting. Additional Husqvarna Viking Emerald 2030 feet are listed here: https://www.sewingpartsonline.com/viking-emerald-203-sewing-machine-parts.aspx?filter.ptype_gmcfeed_1=%20Presser%20Feet&sort.ss_cat_sort=desc&index=1 .

I hope this helps.

Cindy Wells

Husqvarna Sewing... | 31 views | 0 helpful votes


If you are unable to pull the full bobbin off of the bobbin winder, take the thread of off the bobbin and it should come off easily.
If the thread has too much tension during winding or if wound at full speed, it can cause the bobbin to be compressed on the spindle and it won't come off. I recommend throwing away the bobbin just in case it was deformed in the process.
Wind at 1/2 to 3/4 speed in the future and make sure that it is threaded properly for bobbin winding.

Husqvarna Sewing... | 22 views | 1 helpful votes


depends on where you live and who would want to buy.
New sewing machines can be bought at Walmart for $99 - $200 with a lot of stitches and extras. :-)

Husqvarna Sewing... | 61 views | 0 helpful votes


1-get a piece of wax 2-or a bar of soap you rub the wax OR the soap on the stretch fabric that will allow the needle to go thru with no problem 3-get a piece wooly fabric wet it with sewing machine oil and set it some where on top of sewing machine UNDER THE TREAD THAT WILL ALLOW THE TREAD TO GET WET AS YOU DO THE SEWING.

Husqvarna Sewing... | 23 views | 0 helpful votes


Make sure you are using the correct bobbin, and that it was threaded properly. Check needle and plate to make sure there are no nicks. Clean all fuzz from the bobbin area. Always thread needle with needle down.

Husqvarna Sewing... | 28 views | 0 helpful votes


https://manualmachine.com/husqvarna/platinum-plus/919500-user-manual/

Husqvarna Sewing... | 28 views | 0 helpful votes


This is a design you have successfully sewn prior? Check available memory... go FileManager-> QuickHelp-> MyFiles, it will show available memory. Or could be the file is corrupt, load new copy into machine.


How minutes does it take to sew, design? I'm wondering if you have utility power issue<?>. May be try running machine off a properly sized UPS.

Or could be machine failure. May be try a different design file that you know worked prior.

Husqvarna Sewing... | 33 views | 0 helpful votes

Not finding what you are looking for?
Husqvarna Logo

3,959 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...