IBM Logo

IBM Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 87K Answers
  • 3M Views

how to repair Tape drive broken ts3100 ibm

IBM System... | Answered Yesterday


In such situation below steps can be helpful...

Run Fixup command line tool (fixup -f)
Load fixup -i mail\file.nsf
Fixup command line tool checks all documents in the database.
Run Compact command line tool (compact -i -c -d -K)
Load compact -c -i mail\file.nsf

See more helpful solutions found in Internet...
http://www.filerepairforum.com/forum/other/other-aa/lotus-notes/1472-lotus-notes-file-problem
https://www.repairtoolbox.com/lotusnotesrepair.html Lotus Notes Repair Toolbox
http://forums.techguy.org/windows-7/1135994-i-need-help-lotus-notes.html

IBM Lotus Notes... | Answered on Jul 09, 2019


Check CMOS and Memory Modules:::If the error message is "UNEXPECTED_KERNEL_MODE_TRAP," then it indicates you have problem with the memory of your computer. You need to check whether the SIMMs (Single Inline Memory Modules) are compatible and have the same speed. Secondly, also check whether you have set the CMOS (Complementary Metal Oxide Semiconductor) to the right amount of RAM. If these solutions do not work, you might have to replace memory in your computer....try to use system utility tool like Reginout.. Hope the problem is resolved.

IBM ThinkPad T43... | Answered on Jun 27, 2019


Turn off, remove print wheel, turn on, turn off, reinstall print wheel, turn on. Make sure PROPORTIONAL SPACING is not selected.

IBM Office... | Answered on Jun 15, 2019


Take a q-tip and wipe the optical lens being careful not to apply pressure against the lens. This may or not help. Worth a try. Bud

IBM Optical... | Answered on Jun 13, 2019


hi sir,
my ibmx3400 server is not boot on moniter would not display any thing

IBM x3400 Server | Answered on May 12, 2019


You can have a SATA system OR SCSI, not both

IBM eServer... | Answered on May 08, 2019


Do you get the 12v side also?

IBM eServer... | Answered on May 08, 2019


Boot in safe mode and remove the monitor, restart and it will find the monitor

IBM NetVista PC... | Answered on May 08, 2019


Have you tried using an external monitor to make sure the video is working on the new motherboard?

IBM Computers &... | Answered on May 08, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top IBM Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Brad Brown

Level 3 Expert

18067 Answers

Are you an IBM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...