JVC Audio Players & Recorders - Recent Questions, Troubleshooting & Support


Hi Honwani, indicates model of the JVC team you are commenting on, in order to find the best possible solution
I wait your answer
Regards Franco Dosil

Hola Honwani, indica modelo del equipo JVC del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

JVC Audio... | Answered on Aug 26, 2019


Yes, you can connect all the other speakers and not have a center speaker. It will not damage the amplifier. But be aware, that many of the surround functions will not sound good without the center speaker. In just about every surround mode the center speaker gets more audio to it than any other speaker. It would sound better if you took one of the rear speakers and used it for a center speaker and have one rear speaker output no connected. The rear speakers get the least amount of sound going to them in all surround modes.

I hope this helps and a Fixya! rating would be appreciated. After all, it is the only reward we get for offering people like yourself free help. Most people never even bother to rate our free help here.

Thanks,
Dave

JVC TH-M606... | Answered on Aug 25, 2019


Hi Leonard Oliver, what are you needing a JVC tape player ?, indicates the model
I wait your answer
Regards Franco Dosil

Hola Leonard Oliver, que estas necesitando de un reproductor de cintas JVC?, indica el modelo
Espero tu respuesta
Saludos Franco Dosil

JVC Audio... | Answered on Aug 15, 2019


Hello Paul, what you have found is a cassette recorder rewriter of two mechanisms, commonly called "Double Cassette"
to be able to listen or record, you would have to connect it to an amplifier that has a Tape input
You can not connect directly to the speakers, unless the speakers have their own amplifier, if so, you would need a cable from two RCA to two RCA
I hope you serve my comment
Greetings Franco Dosil

Hola Paul, lo que has encontrado es un reproductor grabador de cassette de dos mecanismos, com?nmente llamado "Doble Cassettera"
para poder escuchar o grabar, tendr?as que conectarlo a un amplificador que tenga entrada de Tape
No puedes conectarle directamente a los parlante, salvo que los parlantes, tengan amplificador propio, si fuera as?, necesitar?as un cable de dos RCA a dos RCA
Espero te sirva mi comentario
Saludos Franco Dosil

JVC Audio... | Answered on Jul 26, 2019


Go to the speaker selector and set it tonone or headphones...

Good luck!

JVC Audio... | Answered on Jun 10, 2019


depends on model some dont have a jack

JVC Audio... | Answered on Jun 01, 2019


Hello Velile, indicate the model of your Home Theater JVC, to find the best possible solution
Try disconnecting your JVC from the socket, then check that the cables that go to the speakers are well, that they are not peeled or shorted, after checking, reconnect and see if you are still in Protect
If you continue in Protect, I suggest you contact a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Velile, indica el modelo de tu Home Theater JVC, para poder encontrar la mejor soluci?n posible
Prueba desconectar tu JVC del toma de corriente, luego revisa que los cables que van hacia los parlantes se encuentren bien, que no se encuentren pelados o en cortocircuito, despu?s de revisar, vuelve a conectar y f?jate si sigue en Protect
Si continua en Protect, te sugiero te contactes con un servicio t?cnico especializado
Espero Puedas resolver el problema
Saludos Franco Dosil

JVC Audio... | Answered on May 21, 2019


Hi Mark, so you account for your JVC, you are not reading the CD, should you indicate on the display, "NO DISC", have you tried to clean the lens of the laser reader, with a cotton swab with a little alcohol?
Another possibility would be that you had, low emission of the reader, which could be adjusted, using the necessary instruments
If after cleaning the reader, it does not work, I suggest you look for a specialized technical service
I hope to solve the problem
Greetings Franco Dosil

Hola Mark, por lo que cuentas tu JVC, no esta leyendo el CD, deber?a indicarte en el display, "NO DISC", has probado limpiar la lente del lector l?ser, con un hisopo de algod?n con un poquito de alcohol?
Otra posibilidad seria que tuvieras, baja emisi?n del lector, el cual se podr?a ajustar, utilizando el instrumental necesario
Si despu?s de limpiar el lector, no funciono, te sugiero que busques un servicio t?cnico especializado
Espero logres resolver el problema
Saludos Franco Dosil
https://elektrotanya.com/jvc_fs-d88.pdf/download.html
https://www.manualslib.com/products/Jvc-Ux-D88-4185098.html

JVC Audio... | Answered on May 15, 2019

Not finding what you are looking for?
JVC Logo

4,651 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

stynger007

Level 1 Expert

33 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...