Kenwood Car Audio & Video - Recent Questions, Troubleshooting & Support


Kenwood has the manual for the KDC-U346 available through the Car Electronics support page: https://www.kenwood.com/cs/ce/ . Enter the model number and click the search button. Click on the link to your model's support and scroll down to find the manuals. The current link to the KDC-U346 manual in English is http://manual.kenwood.com/files/4acea67631aca.pdf . This manual covers several Kenwood models.

I hope this helps.

Cindy Wells

Kenwood Car... | Answered on Aug 16, 2019


try this

KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Kenwood... | Answered on Jul 24, 2019


What button should I push if I don't have an "auto" button, both on the remote or the head unit? I have a dNx-5140. All help would be appreciated.

Kenwood... | Answered on Jul 24, 2019


Found it on Page 23 of the manual.

225b60d.jpg




Best of Luck.

Please RATE my solution BELOW.

Kenwood KDC-X591... | Answered on Jul 22, 2019


Kenwoods are awesome. Read the manual, sometimes it gets confused with the Folder trees, if you have to many it goes crazy. It could also be the way the disk is burned, and how the songs are named. I beleive in display options too you can click how things are displayed i.e. folder, artist, song name, title, time. Read your manual.

Kenwood KDC-X591... | Answered on Jul 22, 2019


Push the AME button in the upper right hand corner of the unit and at the same time hold the fast forward button on the face of the unit - do this for 5 secs. The word "Code" should pop up (not blinking).

Using your remote control press the following numbers:
5 (two times for letter "K")
2 (three times for letter "C")
2 (one time for letter "A")
7 ((two times for letter "R")

Then using your remote control, press the fast forward button and you are done. "Approved" should pop up on the unit.

Hope this helps!

Kenwood KDC-X591... | Answered on Jul 22, 2019


need code to reset my radio

Kenwood KDC-X591... | Answered on Jul 22, 2019


find the lil hole in front of the face use a paper clip to reset it if it keeps on doing it you got a speaker going bad

Kenwood KDC-X591... | Answered on Jul 22, 2019


The USB and Aux. connections are on the back of the unit. Here is a website with the specs for it.

http://www.crutchfield.com/p_113KDCX591/Kenwood-Excelon-KDC-X591.html?tp=5684&tab=features_and_specs

Kenwood KDC-X591... | Answered on Jul 22, 2019

Not finding what you are looking for?
Kenwood Logo

9,559 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...