Kodak EasyShare - Recent Questions, Troubleshooting & Support - Page 6


Run the clean nozzle maintenance.

Kodak EasyShare... | Answered on Sep 06, 2014


To replace an ink cartridge on a Kodak ESP C310 follow these steps:

1) Make sure your printer is on.
2) Lift the printer access door, and wait for the carriage to move to a position where you can access it. The ink cartridges are located in the printhead.
3) Pinch the tab on the ink cartridge.
4) Lift the ink cartridge out of the printhead.
5) Remove the new ink cartridge from its bag.
IMPORTANT:To prevent the printhead from drying out, insert the ink cartridge into the printhead immediately.
6) Remove the protective cap from the cartridge.
7) Insert the ink cartridge into the printhead.
8) Press down on the ink cartridge tab until you hear a click.
9) Close the printer access door.

That completes changing the ink cartridges.

Thank

Mark

Kodak EasyShare... | Answered on Aug 25, 2014


It's probably a fragment or small piece. Look at paper path with a lot of light very carefully. You may need to dismantle to clear it.

Kodak EasyShare... | Answered on Aug 08, 2014


Did I mention it sounds like the scanning assembly is locked in place for travel and needs unlocking?

Kodak EASYSHARE... | Answered on Aug 04, 2014


From what I read, you would need to install the firmware update for W7 compatibility:

http://support.en.kodak.com/app/answers/detail/a_id/16994/~/kodak-easyshare-photo-printer-300-firmware---windows-operating-systems/selected/true

Kodak EASYSHARE... | Answered on Jul 26, 2014


Replace Printer With A Hewlet Packard Color Inkjet Printer!
HP Printers Are The Best! Trust Me Im A Technician!

Kodak EASYSHARE... | Answered on Jul 26, 2014


Check if the chip connected to the cartridge has clean contacts. Also check the contacts in the printer. Perhaps you need a very small mirror and a flashlight. If only one contact is dirty, or some dust or paper is between two contacts, the printer will not recognise the cartridge.

Kodak EasyShare... | Answered on Jul 15, 2014


the print head is at fault .The instruction manual will tell you the way to clean it .If all else fails remove the head flush with warm water till it runs clear of ink . obtain some Windex glass cleaner ,place head in a bowl cover with cleaner leave over night then flush and dry ,it has worked for me worth a try.

Kodak EasyShare... | Answered on Jul 11, 2014


Clean the paper feed with alcohol and a paper towel by rubbing and rotating the drum. Wait for it to dry completely then it should grab the paper. Also make sure paper is free from dust. Good luck!

Kodak EasyShare... | Answered on Jul 11, 2014

Not finding what you are looking for?

-2,845 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kodak Office Equipment & Supplies

  • Forum

View Most Popular

  • Kodak Office Equipment & Supplies
Loading...