Kodak ESP - Recent Questions, Troubleshooting & Support


Selecting FCC / CE Compliant Wireless Modules

Consider the following when choosing a wireless communication topology. Read more at https://www.optimatech.net/knowledge-center/selecting-fcc-ce-compliant-wireless-modules.aspx

Kodak ESP 2170... | Answered on Jul 10, 2019


Efficient, Effective Source for Electronic Manufacturing Services.
https://www.optimatech.net/pcb-ems.aspx

Kodak ESP 3... | Answered on Jun 18, 2019


You may face the "Error code-20′ with your printer installed in your Windows 7. The cause of the display of "Error code-20′ may be due to the following reasons. The desired printer may not be the default printer for your prints, issues with the USB composite device, and file missing or file corruption with the printer software supplied by your original equipment manufacturer.

Kodak ESP 3... | Answered on Jun 04, 2019


Hi , i have been using avery templates and label paper at work for ages and always printed off without problems on my lexmark . I bought a Kodak however and all of a sudden I could no longer print off my labels , when I put paper in it just came out blank and said paper wrong size .I could not find any solutions at all and was tearing my hair out . I just kept trying different things and all of a sudden I changed a setting and it worked perfectly.When you go to print your label change the ' scale to paper size ' function to A4 and then it will print.
hope this helps

Kodak ESP 3... | Answered on Mar 06, 2019


Paper not feeding in all-in-one printer - Kodak

support.en.kodak.com/.../paper-not-feeding-in-all-in-one-printer

KodakPaper not feeding in all-in-one printer. Published 10/19/2010 04:38 PM ' Updated 09/23/2014 01:38 PM ' Answer ID 19640. What should I do if the paper does ...

Basic troubleshooting - Kodak

resources.kodak.com/support/shtml/en/manuals/.../urg01238c11s1.shtml
KODAK ESP Office 2100 Series All-in-One Printers - Extended User Guide ... If you experience an error with your printer, restarting your printer will ... For wireless connectivity issues, go to www.kodak.com/go/inkjetnetworking. Carriage ... If thepaper is not stacking properly in the output tray, remove the pages as they exit.

[Solved] Kodak ESP Printer Paper Jam - YouTube

? 20:50
https://www.youtube.com/watch?v=jpkitdHmkuc
Aug 15, 2014 - Uploaded by Sabretooth Barnacle
This is probably a common issue amongst all Kodak Printers. ...thanks for the video, these same instructions worked on theKodak 2150! ... What do you thinkthe pproblem is, Kodak offered me another one for ... the printer realises they don't match so rejects the paper until you feed in the size it's expecting.

Paper won't feed on kodak 2150 printer - Fixya



Kodak ESP Office... | Answered on Dec 04, 2018


KODAK All-in-One Printer Software (including drivers) for all 5000-Series and ESP-Series Printers -> http://download.kodak.com/digital/software/inkjet/v5_1_0/Bits/webdownload/aio_install.exe

download size ~300 Mb

Kodak ESP 5... | Answered on Nov 29, 2018


You may choose PCB assembly what you want on https://www.raypcb.com/

Kodak ESP Office... | Answered on Oct 15, 2018


This problem has plagued me for a very long time. The issue is that the printer head is "glued" in the resting position under the guard of the printer, so you can't remove the ink cartridges to clean it. Solution is to (I know this sounds stupid, but it works) turn the printer on the side where the printer cartridges are (if they are stuck on the left side, turn the printer on its side so the cartridges are on the bottom). Turn the printer on, and the cartridges magically start moving! I guess there are some sensors that get tricked out when you tip the printer on its side. If the cartridges are still stuck, click the "ok" button, and before it gets a chance to see if you actually fixed the problem, turn the printer off using the power button. It takes a long time, but you should see the ink trap lower (release the ink cartridges) and the ink cartridges start moving to prepare for shutdown! Grab the cartridges when they move out of their hiding place and don't let them go back until you clean the print head so it doesn't get stuck again. Remove the ink cartridges, then push the grey tab to release the print head. Wipe the bottom of the print head clean with rubbing alcohol (it will have a lot of gooey - sticky ink stuck on the bottom). I used nail polish remover since I didn't have rubbing alcohol available. You can also wipe down the ink pad which is where the ink cartridges were previously jammed to clean up more of the mess and prevent this sort of thing happening again too soon. Good luck!

Kodak ESP 7250... | Answered on Aug 23, 2018


You should consult the user manual that you obtained with the printer. I suppose it would contain the best assistance on how to install the printer head. And if you do not have the user manual, you can readily get instructions online. Geeetech Me Creator 3D Printer 2 0 Free Shipping

Kodak ESP 3... | Answered on Apr 06, 2018


From the kodak website:

Error "System status failed" (3807)

How do I resolve the error message "System status failed" (error code 3807)?

To resolve the error message "System status failed" (error code 3807):
Disconnect the power adapter from the printer.
Wait 30 seconds to allow the printer to reset.
Connect the power adapter to the printer. Turn the printer on if necessary

If the error continues:
Open the printer access door.
Remove and install the printhead two times.
Close the printer access door.
Wait until the printer is ready to use.

If the error is resolved, upgrade your printer's firmware.

If the error is not resolved, contact kodak.

Hope this helps

Kodak ESP 5... | Answered on Mar 28, 2018


error 3501: STATUS_ERROR_UNIT_OPENED_WHEN_IDLE. You probably had it open when you inserted your cartridges.

Error 3502: STATUS_ERROR_MAIN_PAPER_TRAY_EMPTY. You must have inserted some shortly after you turned the printer on for the first time so don't worry.

Error 3609: STATUS_ERROR_UNIT_OPEN_WHILE_PRINTING. This is also another basic function on the printer.

I would recommend not looking at the errors on a printer test page as they show all errors that come up on the printer, even if they are not important.

Kodak ESP 3... | Answered on Mar 28, 2018


According to Kodak, that error just means the cover was open. I noticed when I print a diagnostic sheet that error shows up whenever I change the ink.

Kodak ESP 5... | Answered on Mar 28, 2018


If everything is ok and printer is not printing it needs to be checked manually now. If you wish you can contact me at +1631-855-3940
or through IMO app +918510879267

Kodak Esp 3250... | Answered on Feb 17, 2018

Not finding what you are looking for?

-1,356 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Cindy Wells

Level 3 Expert

5941 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kodak Office Equipment & Supplies

  • Forum

View Most Popular

  • Kodak Office Equipment & Supplies
Loading...