Konica Minolta bizhub - Recent Questions, Troubleshooting & Support


help me my konico minolta bizhub 184/164 error (C2558)
my mail id - debajitdutta141@gmail.com

Konica Minolta... | Answered on Jun 27, 2019


My Friend You must do general service in your photocopier and then you must program your machine.

Konica Minolta... | Answered on Jun 24, 2019


sintam se cumprimentados, estou com um problema na minha bizhub 211 ela pede para contactar tecnico (M1).como faco

Konica Minolta... | Answered on Jun 24, 2019


Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.

Konica Minolta... | Answered on Jun 24, 2019


COF32 means the ATDC sensor has detected some unusually high or low readings.
The ATDC sensor measure the toner lever inside the developer unit.
Try swithcing on/off, open/close the front door to clear the code.
If this doesn't work, you'll need an engineer to reset the ATDC level.

Good luck

Tam

Konica Minolta... | Answered on Jun 16, 2019


c0211 = Manual tray rise decent error - check PC14 lift up sensor, M2PC tray 2 vertical transport motor and also the tray 2 control board

Konica Minolta... | Answered on Jun 13, 2019


yellow toner or motor

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jun 06, 2019


Enter service mode -counter- parts couner-new release-select fuser-open front door-press start button. Exit technical mode. Good luck

Konica Minolta... | Answered on May 31, 2019


Tray 2 Feeder UP/Down abnormality.
2nd Tray Lift-up motor (M9) is problematic.

Konica Minolta... | Answered on May 20, 2019


try to install the driver again & be sure that is compatible with windows version

Konica Minolta... | Answered on May 15, 2019


A4 paper equals 8 1/2 x 11 paper wrong paper setting

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Apr 30, 2019


Config Mode is depress 2 and 6 and power on. Diagnostic Mode is depress 3 and 6 power on. This is a Lexmark machine with a Konica Minolta logo

Konica Minolta... | Answered on Apr 28, 2019

Not finding what you are looking for?

-495 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Konica Minolta Office Equipment & Supplies

  • Forum

View Most Popular

  • Konica Minolta Office Equipment & Supplies
Loading...