Lexmark E - Recent Questions, Troubleshooting & Support


1.Turn the printer off.2.Open Front cover.3.Press and hold X button.4.Relese X when the ! LED is illuminated. Note:Be patient as the LEDs will light up in multiple patterns before finaly stopping at !.5.Close front cover. Note:Observe that green button and 3 other LED will be illuminated at the same time.This is Home position.6.Slowly press X button until the 3 first LED are illuminated (paper,toner,light)Note:normaly this will require you to press the X button 11 to 13 times depending on the options and features installed.7. Press and hold green button until all LED flasch or strobe from left to right then relese the button.wait until this process stops with the same pattern as step 6.8.Press and hold X until the light pappern return to the pattern of four LED in theHome position.9.Turn the printer OFF.10.Turn the printer On.Note:if on a DHCP network, wait 30 seconds to see if the DHCP server/router sends out an IP adress to the device.11.Press green button to print a setting pages and observe that all the TCP/IP settings have been reset.12.Reconfigure the device using DHCP.Auto IP(zero configuration) or the IP Setup Utility.
This is my solution to the problem.//Oaklunde

Lexmark E260dn... | Answered on Apr 01, 2019


The way that I have found to fix this problem is to replace the logic board but when you do that, this is where the NVRAM mismatch comes in. Once you change the logic you also have to change the display op panel. That is what is giving you this error. You must change logic and op panel at same time and it will not give that error.

Lexmark E450dn... | Answered on Feb 22, 2019


It is just a faulty cartridge you can take back and change it
Lexmark has this trouble there cartridge go to be really good and not out off date or other makes but there own.

Lexmark E240... | Answered on Jan 11, 2019


If you are facing all that types problem then you don't worry we have the solution about that problems, the customer can easily contact with our Lexmark Printer Phone Number 1833 284 2444 it is a toll-free number which is our expert help of your problem for the solution they are available at 24*7.

It has a fine quality printer and printer have good features. Some-time, customers facing errors in Lexmark printers. So don't worry Printer service is available here to provide an instant support in one single touch. Lexmark printer support for Printer problem, Our technical service, and technical expert is trustable. Our expert technicians solve your printer problem within less time, technicians are online support providing which is customer system connected with technicians system directly by online remote systems. If wants to different types of service please visit our expert service website.
Click here for more service


lexmark printer phone number-q3bwfpyz4hhoeznfjazwousi-5-0.png

Lexmark E322... | Answered on Oct 08, 2018


find on the users manual.

Lexmark E260dn... | Answered on Oct 01, 2018


Blinking status light means the printer is busy. If it's not doing anything else, disconnect the printer from the computer. Restart the printer and then print a menu settings page. Clear the print queue on your computer before re-attaching the printer. Thanks.

Lexmark E260dn... | Answered on Sep 12, 2018


Error 935
Printhead Error - Mirror motor unable to reach operation speed Check cables, look for chafing or damage to ribbon cable at sharp bends around rear cover. Replace printhead or ribbon cable.

Lexmark E350d... | Answered on Jul 21, 2018


Hey,

The lexmark drivers and software required for installing the printer is available at www.lexmark.com

Select Drivers & downloads then driver finder.

Type in your model x2350 for example

Select your windows version

Download the setup program.

1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done

Thanks,
Ekse

Lexmark E322... | Answered on Mar 24, 2018


Over time the rollers get slick and hard. If one side is slick and the other edge is not, it will grab paper sideways and you get a paper jam. Get some rubbing alcohol and rub the rollers (completely all around) to get some debris removed. Some rollers require a slight rubbing with an abrasive pad.

Lexmark E250dn... | Answered on Feb 18, 2018


Uninstall the printer and reinstall it.If you don't have the driver windows OS may recognize it depending on how old the printer is.Also the Mfg.'s website will have it

Lexmark E260... | Answered on Feb 02, 2018


Are you using a Lexmark cartridge? If not what is the make and part number of the cartridge you are using.

Alex

Lexmark 28C0000... | Answered on Feb 02, 2018

Not finding what you are looking for?

-3,758 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lexmark Office Equipment & Supplies

  • Forum

View Most Popular

  • Lexmark Office Equipment & Supplies
Loading...