Lexmark Office Equipment & Supplies - Answered Questions & Fixed Issues


I would be happy to help you with this. However, I would need some information:

What is the printer model?

When do you see the error?
You need of any our Technical Support agent. Please call Technical Support team at +1 888 597 3962 our experts are available 24/7 by phone.
More Info - https://www.quickhelps.co/phone-number/lexmark/

Lexmark Office... | Answered Yesterday | 28 views


The 1203 error indicates either a communication problem between your cartridges and your printer or a short in one of the cartridges. Please follow the steps below to identify and fix the issue:

1. Make sure the printer is on.

2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.

Note: If the carrier does not automatically move to the center, turn off the printer/unplug the printer from the power source and then slide the carrier to the center.

3. Remove both cartridges from the carrier.

4. Close the printer cover.

5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

6. When the printer turns on, reinsert one cartridge first.

7. Close the printer cover and check for any errors.

8. If no error appears, reinsert the other cartridge. Close the printer cover.

9. Replace whichever cartridge is causing the error to appear with a new cartridge. Then try to print a document again to verify that the problem is fixed.

Lexmark X5470... | Answered Yesterday | 1,078 views


http://support.lexmark.com/index?pmv=print&page=content&locale=en&userlocale=EN_US&id=HO2727

Lexmark Office... | Answered on Jul 11, 2019 | 12 views


If you get errors after refilling and then you clear the error! And you still get errors occuring then this is a problem with the cartridge.
1)The cartridges printhead may have burned out if it was run dry. (new cartridge is required)
2) No ink is coming out of the port hole! Try dabbing the bottom of the cartridge on tissue. Ink should appear if not then use tissue with Isopropyl alcohol and blot lightly until ink apppears.
3) If not ink appears then you may have an air bubble blocking the flow of the ink. wrap cartridge tightly in plastic wrap holing in an up right position whip downwards this will force air to the top of the cartridge and open the port on the bottom. Remove wrap and try it out.
4) If the cartridge sat empty for a period of time before refilling you are wasting your time. The ink is probably sitting at the top of the cartridge and can not migrate to the bottom, in this case it may have burned out.

In refilling of Lexmark cartridges:
Refill often and do not allow them to run dry. Running them while there is not ink in the cartridge burns the print head out and the cartridge will not work and you will get an error.
By refilling often the cartridge stays in good condition, you do not run out of ink during a print job, and the cartridge will have a prolonged life span.

Lexmark P4350... | Answered on Jul 10, 2019 | 363 views


board problem. translating the goobledi ****, without seeing the printer. my suggestion is..made in China...
plug directly into wall outlet, if not go. get another, but not Lexmark.
Brother is a good brand.

Lexmark Office... | Answered on Jul 10, 2019 | 79 views


Helpful info. Thanks.

Lexmark Office... | Answered on Jul 04, 2019 | 18 views


Request it from Lexmark

Lexmark Office... | Answered on Jun 27, 2019 | 19 views


It depends on your actual printer. Goto this site and click down through your particular model. Gets to the proper support department.

http://support.lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=EN&userlocale=EN_US

Lexmark Office... | Answered on Jun 19, 2019 | 17 views


wrong number doofus

Lexmark Office... | Answered on Jun 12, 2019 | 18 views


how many pages has it printed? probably needs internal cleaning/replacement on the rollers.

Lexmark Office... | Answered on Jun 10, 2019 | 18 views


Contact Lexmark.

Lexmark Office... | Answered on Jun 07, 2019 | 36 views


no thanks

Lexmark Office... | Answered on Jun 06, 2019 | 29 views


no thanks again

Lexmark Office... | Answered on Jun 06, 2019 | 29 views


Hmmm... There may be a problem with your print cartridge or your Ink Cartridges.

Lexmark Office... | Answered on May 31, 2019 | 24 views


Go to drivers.softpedia.com and search for "Lexmark X1278" It should have all the software and drivers for all operating systems.

Lexmark Z600... | Answered on May 31, 2019 | 563 views


What Operating System Do you currently have?

Lexmark Z600... | Answered on May 31, 2019 | 61 views


Hmmmm.... Just a question, is it a brand new cartridge? If it is, it may be dried up.

Lexmark Z600... | Answered on May 31, 2019 | 117 views

Not finding what you are looking for?
Lexmark Logo

Family Lines

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...