Lexmark X - Recent Questions, Troubleshooting & Support


typically faxing doesn't work on VOIP. i tried many times and sometimes it would go through although it said it didn't. other times it didn't work at all. VOIP has a limited bandwidth and the fax needs to send more info over the line than VOIP makes room for.

to have the best luck, stop all downloads and other network traffic while attempting to fax, so that there are no other programs or devices using the internet. the fax will have its best chance of working that way, although it probably still won't

here are some very good tips as well:
http://chris.pirillo.com/how-to-fax-over-voip-on-the-internet/

Lexmark X4270... | Answered on Dec 28, 2018


http://support.lexmark.com/index?page=content&locale=en&productCode=&segment=SUPPORT&clearQuestion=Y&userlocale=EN_US&id=SO1912

Quoting from support.lexmark.com above:

Problem

Error: "936 Main Drive Motor"; Error: "936 Transport Motor"; Error: "937 Main Drive Motor"; Error: "937 Transport Motor"

Environment

The 936 and 937 error codes indicate that the printer thinks there is a problem with the main drive motor.

Solution



  1. If your printer is posting one of these errors, turn it off and let it sit powered off for at least a minute.
  2. While the printer is off, open all of the doors and covers on the printer. Also remove the toner cartridge. Make sure there is no paper jammed in the printer. Pay close attention to the area where the toner cartridge sits. The main motor is located just to the left of the toner cartridge.
  3. If nothing appears to be wrong with the inside of the printer, reinstall the toner cartridge and close all the doors and covers. Now power the printer back on. If the error does not return, try printing again.
  4. If the error does not return when you print, continue using the printer. If the error does not return after a few days, this may have been an isolated incident and the printer should be fine.

Lexmark X342n... | Answered on Dec 13, 2018


How To Solve Scanning Problem in Lexmark Printer 1800383368 Support Number Australia?
If you face any problem with Lexmark printer then Call Lexmark Printer Support Australia on 1-800-383-368.
Everyone Need Printer Support in Lexmark. We are providing Technical Support to the Printer Users. Through Help Desk Australia Contact Numbers.
How to Contact Lexmark Printer Customer Service Australia?
1. Faults in Paper trays
2. Wired and Wireless printer problems
3. Driver Installation Problem
4. Cartridge Error
5. Ink Troubleshoot
If you have any Problem in Lexmark Printer then Call Lexmark Printer Support Australia. We have Expert teams which give services to the Customers. If You Need Any Technical Help then Visit Our Website or Call Lexmark Printer Support Australia.
Lexmark Printer Customer Service Australia
1-800-383-368
Website- https://www.helpdeskaustralia.com/lexmark-printer-support.html


lexmark printer new-pkpebuy3is2j53obe5gyfta1-4-0.jpg

Lexmark X4550... | Answered on Nov 29, 2018


Don't know for sure, but I found some user manuals on amazon, which can be helpful... take a look here: Amazon com lexmark manual I hope this helped you. Have a nice day

Lexmark X5650... | Answered on Nov 20, 2018


Please visit the Lexmark website, www.lexmark.com Support or Driver and Downloads.

Search by using the printer model and operating system that you need the driver for.

If you do not see a driver for the printer, then more than likely Lexmark has made a decision that the technology in the printer no longer matches up with the current demands of both software and hardware.

Don

Lexmark X4250... | Answered on Nov 13, 2018


Here is the link to the exact manual you need:

http://www.lexmark.com/publications/pdfs/2007/2600/v7649663_en.pdf

Lexmark X2650... | Answered on Oct 11, 2018


You should call on ((+1-800-585-2494 )) Toll Free Lexmark and get help for Lexmark.

Lexmark X5470... | Answered on Oct 10, 2018


Usually you need to access the embedded web server on the printer by typing the IP address of the printer into your web browser address bar. This will open a window that will have all the settings available.

Lexmark X Office... | Answered on Oct 04, 2018


To download the manual for Lexmark X4270, please click the link below:

Lexmark X4270 Manual


Thank you

Lexmark X4270... | Answered on Oct 04, 2018


Here is the link to Lexmark's website for this printer.

http://www.lexmark.com/publications/pdfs/2007/4200/en.html

Don

Lexmark X4270... | Answered on Sep 24, 2018


Lexmark Printer Problems ' FixYourOwnPrinter

www.fixyourownprinter.com/posts/13953
My printer Z12 Color Jetprinter is printing triple letters (printing on top of each other). ..... I have a Lexmark All-In-One X5150---It says "color cartridge missing" butthe ... We removed the ink cartridge and looked on the back of it and realised that .....to the right side of the computer ..if someone can tell me whats wrong or how ...

Lexmark Reset ink cartridge ' FixYourOwnPrinter

www.fixyourownprinter.com/posts/35235
Jun 3, 2009 - Does any one know how I can reset my ink levels in the Lexmark All inone ... The best way to reset any lexmark inkjet is to buy a real printer. ... fool the empty ink cartridge signal on the Lexmark but putting a piece of "that never ..... So sure the printer prints but is it just using up the color cartridge to make the ...

[PDF]5000 Series User's Guide - Lexmark


Lexmark X5070... | Answered on Sep 20, 2018


Which versions do you want?
ISIS Twain Driver ver1.1 1.2 1.3 1.7 1.8 1.9 2.3 2.5 etc

Some support Win8 others do not

Lexmark X2650... | Answered on Sep 17, 2018


The Lexmark OCR scan software is available in the installation disk only. Insert the disk in your computer to install the software. You can also manually install it. Insert the disk in your computer > open My Computer/ Computer> right click on the disk Drive for the Lexmark installer > Explore (XP)/ Open (Windows 7). Open the OCR folder and execute the Setup application. Just finish the installation.
If you don't have the disk or you lost it, feel free to contact Lexmark technical support. Thanks.

Lexmark X1270... | Answered on May 16, 2018


Please try to do the following steps


1. Reseat all cartridges and Imaging Basket.

2. Remove Imaging Unit. To see the complete instructions on how to remove/replace the Imaging Unit, click the link http://bit.ly/jhK9fF

3. Clean the HVPS (high voltage power supply) and POGO pins and the corresponding electrical contact on the Imaging Unit with a clean, dry cloth. Click on the link http://bit.ly/jv58Nj to see the POGO pins location.

4. Replace all cartridges and Image Basket (you need to send bad cartridges back).

5. If supplies replacement doesn

Lexmark X544dn... | Answered on Apr 25, 2018


093-950 Y - CRUM Error
Error 093-950
Restart Printer

The yellow toner Smart Chip error is detected

Error with detecting or defective yellow toner cartridge. Replacing cartridge should correct it.
Paul

Lexmark X560n... | Answered on Mar 28, 2018


Call printer support USA Number 1-888-687-4491 Toll-free and find instant help by experts technicins.

Lexmark X3550... | Answered on Mar 06, 2018

Not finding what you are looking for?

-4,193 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4293 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

5719 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lexmark Office Equipment & Supplies

  • Forum

View Most Popular

  • Lexmark Office Equipment & Supplies
Loading...