LG Washing Machines - Page 2 - Recent Questions, Troubleshooting & Support


It could be damaged or worn bearings. It can also be a broken spider. The spider attaches to the inner drum and is part of the spindle assembly.

LG WD-80130F | Answered on Jul 12, 2019


I'm sure you double checked, but I have forgotten to plug the connectors from the control back together before putting the top back on. Seems obvious but I've done it more than once. Good luck. (And make sure your house breaker isn't tripped)

LG Washing... | Answered on Jul 08, 2019


The lid has hinges on the back so it rotates back from the front. The front is held in place but two metal clips. Push a metal spatula in the seam between the top and front to release the clips. Clips are about 1/4 in from each side.

LG Washing... | Answered on Jul 04, 2019


i would guess you are getting a "tE" error code. that is a bad thermistor. pretty common. and it starts out as an intermittent error. it really is an easy fix. great online videos. check out appliancepartspros.com for both video and parts or repairclinic.com for video and parts. or youtube.com

LG TROMM WM2688H... | Answered on Jul 02, 2019


If this is a front loader and older model check the spider arm on the back of the drum it may be corroded and putting the drum off center at low speed. I just replaced the drum to tub gasket and the spider arm which was severely corroded (name may not be correct go to the LG parts site)

LG Washing... | Answered on Jul 02, 2019


I just finish repairing my LG front loader and this sounds like the same issue. The back of the drum has a spider arm and spindle arrangement (think that the name) the spider are was corroded and broke after 10 years, this puts the drum off balance and chews up the gasket. I had to also repair the wash tub where the drum had worn into it and JB Weld worked fine. It all seem to work fine now.

LG Washing... | Answered on Jul 01, 2019


Hello,
DL is indeed a door lock error. The code is generated when the CCU can't lock the door. Possible causes are door latch mechanism, connecting wiring, or the CCU. You could hear clicking from the CCU machine which indicated to me the CCU was trying to lock the door. It tries 6 times before setting the F/DL code.
?Check Door Lock/Switch Assembly for foreign objects
?Check Wire Harness connections to the Door Lock/Switch Assembly

All the best !

LG Washing... | Answered on Jun 30, 2019


Try turning the water pressure down. If you have high water pressure the water comes into the dispenser to hard and splashes over the front & side of the dispenser draw the trickles down the inside of the front panel out on to the floor. Very common front loader problem.

LG WM0642H Front... | Answered on Jun 28, 2019


could be lid switch are some else, you should call techicain to help you out

LG Washing... | Answered on Jun 24, 2019


Possibly the circuit breaker failed and cannot be reset.

LG Washing... | Answered on Jun 23, 2019


Hello Johan,
This sounds like the pump has jammed up or the pump has failed. Remove pump and check wether there is anything jamming it up.
also if you put it on a spin cycle check if the pump is humming.
If Yes, there is your problem.
You will need to remove the pump to check that out.
Make sure it iturn freely.


https://www.manualslib.com/manual/645286/Lg-Wf-S1317t.html#product-WF-T1303TP

LG Washing... | Answered on Jun 22, 2019


Hello Chris, Here is a link to the user manual. Hope it is helpful to you, best of luck. JP
https://www.manualslib.com/manual/646080/Lg-Wm2010c-Series.html#product-WM2355C

LG Washing... | Answered on Jun 22, 2019

Not finding what you are looking for?
LG Logo

Family Lines

11,829 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...