LG Washing Machines - Page 5 - Recent Questions, Troubleshooting & Support


, : Control Lock
The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door.
While a cycle is running, press and hold Half Load and Energy Saver simultaneously for three seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.

LG Washing... | Answered on Apr 25, 2019


Do you mean it shuts off during spin cycle? It is supposed to if the load is unbalanced. Try redistributing the load to see if that helps.

LG Washing... | Answered on Apr 24, 2019


Replace the 5 way valve. get the old flow restrictor out of the drying cold water line before reconnecting. It came out of the valve to cause the problem.

LG WM3988HWA... | Answered on Apr 17, 2019


Known issue. Requires new/improved pulsate.

LG Washing... | Answered on Apr 16, 2019


Bad thermistor. Easy replace. $10 part. Check out videos from repairclinic.com or AppliancePartsPros.com.

LG Washing... | Answered on Apr 16, 2019


this is not problem with door swicth ..kindly re main Replaced thE MAIN pcb

LG WD-80130F... | Answered on Apr 15, 2019


if i may ask witch model LG washer this is displaying the H1 error?

LG Washing... | Answered on Apr 14, 2019


I have the same problem. please let me know if yours got fixed

LG Washing... | Answered on Apr 05, 2019


Here is what I found for you.
4_2_2019_3_03_41_am.jpeg

LG Washing... | Answered on Apr 02, 2019


Be sure you are using HE detergent and only about 1 Tablespoon for a load. You are ending up with too many bubbles in the machine and when it goes to spin the bubbles come out the air vent. There is a valve that closes during spin but bubbles are not strong enough to lift the valve it has to be water hitting it before it closes.

LG WM-2077C... | Answered on Mar 31, 2019


A tE error code on the display of the washer indicates a heating error, usually caused by a faulty thermistor.
  1. Unplug the washer from the power outlet for 10 seconds.
  2. Plug the washer back in and press the POWER button and then the SPIN SPEED button until No Spin is selected. Press the START/PAUSE button.
  3. Once the washer has drained, restart the wash cycle.
  4. If the tE error code appears again, close the water taps and unplug the washer. The washer will require repair service.

LG Washing... | Answered on Mar 28, 2019


Hi there. In some cases if your dryer vent tube is bunched up behind the dryer and not extended properly or if vent tube is running up the wall to be vented to the outside it will cause water to build up in dryer vent tube. Make sure your flexible dryer tubing is not full of water or clogged with lint and make sure if you have an extended piece that goes to outside ventilation that that is not clogged with lint as well. Hope this helps you with your drying issues.
Cathy

LG Washing... | Answered on Mar 23, 2019

Not finding what you are looking for?
LG Logo

Family Lines

11,828 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...