Pioneer Televison & Video - Recent Questions, Troubleshooting & Support


Pioneer is not great about updates. Here is a link to the user manual. If has been purchased in the last year it should be up to date, and i would contact people where it was purchased.

https://www.pioneerelectronics.com/StaticFiles/Manuals/Home/BDP-31FD_OperatingInstructions0831.pdf

Pioneer... | Answered on Jul 17, 2019


Check out Amazon or ebay your bound to find it.

Pioneer... | Answered on Jul 10, 2019


Each region has a code and if there is any way that u can set it to 0 then all DVD's will be playable...................deepfix

Pioneer... | Answered on Jul 06, 2019


The power supply may have suffered a spontaneous failure independently of the protective equipment.

Pioneer DV600AV... | Answered on Jul 05, 2019


first is to hear if sound is there when a DVD etc is connected to one of the rear audio and video inputs on the set.

Also check speakers in the set are in menu switched ON and not OFF.

If a cable box, sat box, receiver are in use check their settings for sound also==not a bad idea to unplug each unit and then after a few minutes plug each back (set , box, etc) to allow each to try to boot up.

Let me know what you find.

Pioneer... | Answered on Jul 02, 2019


The following article just aims to provide a step by step guide on how to convert 1080p or 720 p MKV to DVD format as well as burn MKV to DVD for playing MKV on DVD player successfully at How to Play 1080p or 720p MKV on DVD Player?

This guide can easily help to:

Convert 1080p MKV to DVD format to burn 1080p MKV to DVD
Convert 720p MKV to DVD format to burn 720p MKV to DVD
Convert MKV files in other resolution to DVD to burn MKV to DVD for play MKV on DVD player
Convert and burn MKV to DVD for successfully playing MKV files on any kind of DVD player
Convert and burn other video files including AVI, WMV, MP4, MPG, FLV, AVCHD, MOV, 3GP, WTV, MXF, and etc to DVD

Pioneer... | Answered on May 31, 2019


Hello Socorro, for what you are saying, your Pioneer is not ventilating the heat produced by the circuits, internally your TV has a series of internal fans, to cool the heat produced by the circuits
I suggest you communicate with a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Socorro, por lo que comentas, tu Pioneer no esta ventilando el calor producido por los circuitos, internamente tu TV tiene una serie de ventiladores internos, para enfriar el calor producido por los circuitos
Te sugiero que te comuniques con un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/290938192PDP42A3HD_US_0420.pdf

Pioneer... | Answered on May 26, 2019


Hello Michael, indicate the model of your TV pioneer
Test if the remote control works, remove the batteries, observe the contacts of the batteries, which are clean, otherwise, clean them so that the batteries make good contact
Once the batteries and contacts have been checked, put them back
Take your cell phone, put it in camera mode and point the emitter LED of the remote control to the camera, press the keys and see if the emitting LED lights up, if so, try directly with the TV
if it does not turn on, you could carefully disassemble the remote control and clean the contacts and the rubber keyboard internally, Do not Use Alcohol to clean
the rubber keyboard, you can clean it with warm water and detergent then let it dry very well, the contact plate, you can use a cloth with a little liquid to clean the glasses, the idea is to remove the rubber residue that is on the contacts
then arm again and try, if not you have results consult a specialized technical service and if you try, you see in the camera that the LED turns on, but the TV does not, then it takes the two devices to the specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Michael, indica el modelo de tu TV Pioneer
Prueba si te control remoto funciona, s?cale las pilas, observa los contactos de las pilas, que se encuentren limpios, sino es as?, limpialos para que las pilas hagan buen contacto
Una vez controlado las pilas y contactos,vuelve a colocarlas
Toma tu celular, pon en modo c?mara y apunta el Led emisor del control remoto hacia la c?mara, presiona las teclas y f?jate si se ilumina el Led emisor, si es as?, prueba directamente con el TV
sino prende, podr?as desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma, No Uses Alcohol para limpiar
el teclado de goma, lo puedes limpiar con agua tibia y detergente luego d?jalo secar muy bien, la placa de los contacto, puedes usar un pa?o con un poco de liquido para limpiar los vidrios, la idea es sacar el residuo de goma que hay sobre los contactos
luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio t?cnico especializado y si pruebas, ves en la c?mara que el Led se enciende, pero el televisor no, entonces lleva los dos aparatos al servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Pioneer... | Answered on May 23, 2019


Hello Michael, indicate the model of your TV pioneer
Test if the remote control works, remove the batteries, observe the contacts of the batteries, which are clean, otherwise, clean them so that the batteries make good contact
Once the batteries and contacts have been checked, put them back
Take your cell phone, put it in camera mode and point the emitter LED of the remote control to the camera, press the keys and see if the emitting LED lights up, if so, try directly with the TV
if it does not turn on, you could carefully disassemble the remote control and clean the contacts and the rubber keyboard internally, Do not Use Alcohol to clean
the rubber keyboard, you can clean it with warm water and detergent then let it dry very well, the contact plate, you can use a cloth with a little liquid to clean the glasses, the idea is to remove the rubber residue that is on the contacts
then arm again and try, but if you have results consult a specialized technical service and if you try, you see in the camera that the Led is turned on, but the TV does not, then it takes the two devices to the specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Michael, indica el modelo de tu TV Pioneer
Prueba si te control remoto funciona, s?cale las pilas, observa los contactos de las pilas, que se encuentren limpios, sino es as?, limpialos para que las pilas hagan buen contacto
Una vez controlado las pilas y contactos,vuelve a colocarlas
Toma tu celular, pon en modo c?mara y apunta el Led emisor del control remoto hacia la c?mara, presiona las teclas y f?jate si se ilumina el Led emisor, si es as?, prueba directamente con el TV
sino prende, podr?as desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma, No Uses Alcohol para limpiar
el teclado de goma, lo puedes limpiar con agua tibia y detergente luego d?jalo secar muy bien, la placa de los contacto, puedes usar un pa?o con un poco de liquido para limpiar los vidrios, la idea es sacar el residuo de goma que hay sobre los contactos
luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio t?cnico especializado y si pruebas, ves en la camara que el Led se enciende, pero el televisor no, entonces lleva los dos aparatos al servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Pioneer... | Answered on May 23, 2019


Google the manual or try the manufacturers web site for it if there are no external control buttons.

Pioneer... | Answered on May 19, 2019


Power up and press open button as soon as it starts to spin, some dvds lock with read errors, some spit the disc out..
If the belt is worn open unit, remove tray and replace rubber belt, if you dont have one use a thick rubber band.
if you cant access rubber belt, most dvd's have a slide underneath. use a small screwdriver and manually slide it open.
Read errors are not always the laser...so dont go and waste money.
If your dvd is not hq using dc brushless motors, remove loader, give the spindle and sled motor a good lube with wd40, spin the spindle moto up with 5-7 volts to clean the commutator.
Carbon builds up and the motors dont spin at correct speed.
Sled remove drive gear, usually pops out and burn it clean as above.
I have had good results with above since 2004, repaired 1000's of dvd's over my 14 years as senior engineer for wholesale importer in cape town.
Good luck
44ct357 CT SA

Pioneer DV-C503... | Answered on May 19, 2019

Not finding what you are looking for?
Pioneer Logo

4,096 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...