Red Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 14 Products
  • 272 Answers

would imagine you need to purchase a new connecter . FIXYA website is not a seller of any products

Red Video Game... | Answered on May 24, 2019

repair website based in the usa wouldnt know

Red Computers &... | Answered on May 12, 2019

the red key has to do with security.. if you have a remote control for your security alarm you may need to change the batteries

Red Motorcycles | Answered on Apr 25, 2019

batteries in backwards, or not new and fresh.
no PC stated.
no OS stated.
so.... that be first. knowing what you have there.

Red Computers &... | Answered on Apr 19, 2019

the battery is bad, they do that when the fail.

new battery time.
the battery charge time is listed at 4 hours. micro usb cable.
those cheap batteries inside can last as low as 1 year.
if deeply discharged 100s of times. (battery tech,101)

Red Computers &... | Answered on Apr 14, 2019

Sounds like you have a Lifan 50cc motor to begin with. The loose and disconnected wires are more of a concern to me and without enough information to properly answer the question my suggestion would first to isolate those loose connections by applying electrical tape so that those wires that are exposed so that they do not ground out and short out the CDI, it is very possible that you may have damaged your CDI which is the Computer that controls the motor, spark and other electrical components on the motorcycle itself. Fortunately the CDI’s for Lifan engines can be easily and cheaply sourced on eBay or Amazon but be sure to choose wisely— there are many out there so pay attention to part numbers which may be stamped on the CDI. As For finding an electrical schematic that is going to be a far more difficult task and quite frankly may not be necessary in your case I would start with first taking care of those loose wires followed by checking and or replacing your CDI and see what that will get you. Be sure your battery is properly load tested and charged and GROUNDED properly

Red Motorcycles | Answered on Mar 31, 2019

Check fuel mix for being too lean. It will run hotter. If you are caning it around, they will glow.

Red Motorcycles | Answered on Mar 22, 2019

One of your cartridge is empty or the nozzles are BLOCKED. Go to Settings - Printer, click on the Printer name, Properties and look at the Maintenance tab.

Red Video Game... | Answered on Mar 05, 2019

That is known as the 'ring of *****'. The video processor has overheated and is no longer working. This is caused by blocked airways and inefficient cooling. The BGU requires replacement or you may be lucky just re balling the processor.

Red Video Game... | Answered on Feb 15, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Red Experts

Bill Boyd

Level 3 Expert

53745 Answers

ray gallant
ray gallant

Level 3 Expert

63976 Answers

Tom Chichester

Level 3 Expert

53775 Answers

Are you a Red Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides