Ricoh IS - Answered Questions & Fixed Issues


check for the driver in the new os
add the scanner in the control panel section add a device

Ricoh IS300e... | Answered on Sep 08, 2015 | 129 views


Software (driver) can be found at driverupdate us.
Take a look... I hope this was helpful.
Cheers

Ricoh IS760D... | Answered on Dec 21, 2014 | 1,863 views


on Ricoh's website.

Ricoh IS760D... | Answered on Jul 11, 2014 | 107 views


login: scanner
password: password

Ricoh IS300e... | Answered on Dec 20, 2011 | 5,375 views


Did you ever get your answer? I'm trying to get one to quit pulling from the scan glass when it there's a doc in the ADF. When we load the ADF, the light comes on and everything! grr.

Ricoh IS 330DC... | Answered on Dec 01, 2011 | 212 views


Hi, I am steve, lets get you some help.
Your scanner only supports TWAIN and ISIS. Whilst you can use the scanner from Windows without any problem you can only control it from an application that supports TWAIN or ISIS.
As you have already discovered your application wants to use WIA - you cannot do this automatically. You may want to check whether your application supports either a TWAIN or an ISIS interface (I would expect it to). This is a long running issue with scanner devices.
You could use the Ricoh software and any TWAIN/ISIS enabled software to import the scans then upload the captured file into the application.
Sorry it can't be simpler than that.

Ricoh IS760D... | Answered on Jan 17, 2011 | 1,012 views


The Ricoh IS01 uses a SCSI 2 (50 pin) interface. It should look like the one here: http://www.amazon.com/Cables-Go-03564-SCSI-2-Cable/dp/B000051312 . There are SCSI to USB converters but I'm not sure if you need a specific version. (Scanners require bidirectional communication with the computer so there were few interfaces that required a special connection.)

Depending on your computer's OS, there may be other issues. (Some may not be compatible with Windows Vista or Win7, for example.) Drivers for some OS versions are available here: http://www.ricoh-usa.com/downloads/downloads.aspx . Search for the IS01 (no other information is needed)

I hope this helps.

Cindy Wells

Ricoh Aficio... | Answered on Jan 01, 2011 | 153 views


If line appear in to your scanner pic no repair for that but is only when you print just clean the toner.

scanner Lents cant be change

Ricoh IS760D... | Answered on Dec 17, 2010 | 185 views


Microsoft drivers and installers have changed over time. The ISO1 drivers for XP are available here: http://www.ricoh-usa.com/downloads/downloads.asp?tsn=Ricoh-USA&path=http://support.ricoh.com/bb/html/dr_ut_e/rc2/model/is01/is01en.htm . Click on the down arrow to download the one for XP and then double click on the exe file.

I hope this helps.

Cindy Wells
(NT or Win2K drivers can work under XP at times; Win95 drivers are less likely to work even in the compatibility mode.)

Ricoh ISO1... | Answered on Nov 25, 2010 | 1,212 views


Hello,

I think the color ink in your printer is low or finished, that is why the print out are in black, i will advice you replace the color ink cartridge, in other to keep you moving.
You can get the color ink cartridge at either at amazon.com or ebay.com.

Take care.

Ricoh IS 330DC... | Answered on Sep 02, 2010 | 79 views


These are excellent and well built products with a very long high volume capability and unless in a very dirty environment should not need cleaning of internal optics or assemblies until after about 3 years or more. However the document feeder can get dirty, and the rollers and guides should be cleaned with a mild solution of soapy water, (a few drops of Palmolive Liquid Dish Soap are best); use a good glass cleaner on the scan class and also on the narrow glass view area used for the auto feeding copies. If it does not jam multiple stacks of copies up to about 40 pages of 20 pound bond, it is running just fine. Let me know if you have any further details needed.

Good Luck!

Ricoh Aficio... | Answered on Aug 04, 2010 | 335 views


According to the manual, the part number for the ADF Document Assembly is VRC70001, but you may want to verify this with Ricoh before ordering, because the assembly is not shown in the parts diagram, only listed in the chart.

Hope that helps.

Ricoh IS100E... | Answered on Jul 17, 2010 | 128 views


You were able to scan okay before? If you can print but not scan, generally it's a firewall or permission problem. You could try creating an exception for the Ricoh in your firewall software.

The folder that you scan to hasn't moved, has it? Is the path still exactly the same? Try turning off your firewall and/or anti-virus software and see if you can scan then.

Ricoh Aficio... | Answered on Jun 05, 2010 | 1,044 views


Hi,
These parts have been on ebay before, so do a quick searsh there,
or go to,

www.scannerparts.biz

Ricoh IS 450SE... | Answered on May 11, 2010 | 161 views


plese reinstall driver then u see problem not occurs

Ricoh IS 330DC... | Answered on Apr 19, 2010 | 702 views


My PC Window7 Instal but My scaner Astra 5600/5650 dn't support please download update file

Ricoh IS450DE... | Answered on Apr 17, 2010 | 72 views


In user tools set to scan in multipage pdf's.

Ricoh IS200E... | Answered on Apr 16, 2010 | 132 views

Not finding what you are looking for?

-125 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...