Ricoh Aficio - Recent Questions, Troubleshooting & Support


"Replace Print Cartridge" remains in
display. Then a new AIO cartridge must
be installed. This feature is a safety
measure to prevent the used toner tank
from becoming full (there is no toner
overflow detection mechanism).

Ricoh Aficio Sp... | Answered on Jul 04, 2019


Check its connected to a network, the DHCP server is probably your router if you have a small or home network.
see
http://www.fixya.com/support/t25283562-solve_cannot_connect_dhcp_server_101#solution-section

Ricoh Aficio... | Answered on Jun 29, 2019


SC101 c6 C CIS Lamp/Scanner Motor Error A problem occurred with the CIS or scanner motor in the flatbed scanner: -Carl

Ricoh Aficio SP... | Answered on Jun 28, 2019


Probably, you will have to call your local Ricoh servicer for repair.

Ricoh Aficio... | Answered on Jun 27, 2019


1. ATTACHED PRINTER TO COMPUTER AND TURN IT ON
2. OPEN PRINT PROPERTIES
3. CLICK ON SMART ORGANISER, IF U DO NOT HAVE THIS DOWNLOAD AND INSTALL FROM RICHOH WEBSITE
4. CLICK ON ABOUT
5. MOVE MOUSE ARROW KEY TO PICTURE ABOVE TEXT BOX INSIDE BLUE AREA
6. HOLD SHIFT AND CONTROL KEY AND DOUBLE CLICK RIGHT MOUSE BUTTON TO OPEN SERVICE MENU
>>>>> DO NOT PLAY WITH ANY OTHER SETTING OR YOU MAY PERMANENTLY DAMAGE UR PRINTER<<<<
7. CLICK ON RESET SC FUSE ONCE ONLY. (IT WILL BE SECOND LINE TOP LEFT SIDE)
8. FROM MAIN POWER SWITCH TURN POWER OFF AND AFTER 10 SECOND TURN IT BACK ON.
9. UR PROBLEM WILL BE SOLVED.

Ricoh Aficio... | Answered on Jun 25, 2019


good day can you please advise me how to remove error code 28113 i got RICOH sg3110dn
regards
khan

Ricoh Aficio Sg... | Answered on Jun 13, 2019


press the orange key threee times and enter 107 and then press and hold the stop key for about five seconds.
the machine then takes you into the sysytem. select sp mode on the screen. put off the machine for a minute and put on again

Ricoh Aficio... | Answered on Jun 13, 2019


SC 899 is a software error. For example printing from directly from a website. Various printing from websites makes 899 error. Just remove the print queue from the computer and that's it. Make sure you save the file first from the website before you print to avoid same problem.

Ricoh Aficio... | Answered on Jun 03, 2019


Service mode or maintenance mode:
turn off machine
Hold stop/start & escape and then turn on power
press OK

Ricoh Aficio SP... | Answered on May 14, 2019


Replace Charge corona end blocks

Ricoh Aficio... | Answered on Apr 29, 2019


You need to replace the HDD. It is very simple. Then format it in SP Mode. Reboot. Ready to use.

Ricoh Aficio... | Answered on Apr 25, 2019


  1. Separation bias error. A separation bias leak signal is detected. Causes. • High voltage supply board defective

Ricoh Aficio... | Answered on Apr 17, 2019


Software error 3: Undefined An error not controlled by the system occurred (the error does not come under any other SC code

Ricoh Aficio... | Answered on Apr 17, 2019

Not finding what you are looking for?

-1,417 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ricoh Office Equipment & Supplies

  • Forum

View Most Popular

  • Ricoh Office Equipment & Supplies
Loading...