Russell Hobbs Vacuums - Recent Questions, Troubleshooting & Support


clean the hoses and any part connecting the actual vacuume to the floor attachment.... probably clogged or not getting a good seal....if the motor sounds like its going faster (higher pitch) then its clogged up.....

Russell Hobbs... | Answered on Nov 13, 2013


I does sound like a controller issue. Try testing the charging output (be careful, who knows what the voltage may be coming out) I would say it is the battery but the yellow light thing has me thinking you are right. That thing has been sitting there maintaining the battery for 17 years, it is probably tired. The other bad news is if your battery has been sitting at that low volta.ge it may have a greatly reduced capacity now. Hope this helps some. .

Vacuums | Answered on Oct 15, 2019


THEN CLEAN THE BEATER BAR OF ALL HAIR .

Vacuums | Answered on Oct 14, 2019


Check that the motor and the beater are seated properly. If they are not square to each other then the belt may walk sideways.

Vacuums | Answered on Oct 09, 2019


May you explain more what happen? Did a cap get stuck in the hole? If so take a household vacuum and use the attachment tool to suck the cap out.

Need expert help?
https://www.6ya.com/mr.mike

Vacuums | Answered on Oct 08, 2019


Try a bagless vacuum cleaner as hair blocks up bags very quickly. One that is around 2000 watts should have enough power to do the job. As for the price check appliance stores for sales and deals.

Vacuums | Answered on Oct 08, 2019

Not finding what you are looking for?
Russell Hobbs Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Russell Hobbs Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

JoeVacs

Level 2 Expert

445 Answers

Are you a Russell Hobbs Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...