Sharp Wizard - Recent Questions, Troubleshooting & Support - Page 6
I have a Sharp Wizzard
# Initialize means to start over from scratch.
# The main memory is too jumbled for it to continue.
# The micro controller does not see any valid data so it wants to erase everything.
Check to see that the CARD LOCK switch is LOCKED and not in the
RELEASE position. You may have accidentally left it unlocked after
removing an IC card.
Check that the battery replacement switch on the back of the unit is in
the “NORMAL OPERATION” position. If the switch is in the “REPLACE
BATTERIES” position, the unit cannot be turned on.
Check or replace the operating batteries, even if you have just replaced
the batteries. It is possible that the batteries were not fresh when you
Press the RESET switch. If the unit has been dropped, for example, it
may have to be reset. This will not delete your data. If for any reason
data is missing after resetting the unit, it was lost before you pressed
the RESET switch. The RESET switch simply re-starts the unit.
* Do not reset the unit while holding down the ON button.
* If the procedures above do not work, the memory will have to be erased and you will have to revert to the last time the data was backed up.
You would ask :-
Why would the the organizer tell me to press the ON button while touching and releasing the RESET button if that was going to make me lose all my data?
Solution to the above Question :-
# Think of it as a damaged aircraft in flight --- you have to dump the extra fuel in the wing tanks to land safely.
# You can't save the fuel for later.
# There is no other choice if you want to save the machine for another day.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
on Sep 04, 2010
What has replaced the Sharp
you can get a replace from the below site
what you are to do is to order for the wizard online at below address at a better price and competitive service only if you can not get the wizard at any store around your local area
findbankeasy.com gadgets-reviews.com thewizardshop.net
thank you and thanks for using fixya.
on Aug 31, 2010
f you forget your password, there is no way to bypass the Secret
function or enter a new password without losing all data marked as
If you forget your password, you will not be able to
the Organizer and access your secret information. If this happens, you
will have to delete the old password to be able to continue to use the
Secret function. This will also delete all entries marked as secret.
instructions on how to do this are here Page 56:
Here's another link to the manual for this device :
on Jul 08, 2010
Where is the usb port on the the sharp wizard
Your phone would have came with all the associated cables it needs to connect to a PC. It's not necessarily going to have a 'USB' hole in the phone, there is an 'options' cable slot on the right hand side which will match one of the cables you received in your box, and the other end will be USB for the computer side. Make sure you install all relevant software BEFORE you plug the phone in. If you have windows vista or windows 7, make sure you run the software as administrator. Don't let the disc autorun, close it down, go into Start>computer> and right click on the disc, select 'open' or 'explore' on the disc, right click the phone software and select 'run as administrator'
on Apr 16, 2010
Not finding what you are looking for?