Sharp Office Equipment & Supplies - Popular Questions, Answers, Tips & Manuals


The E "Error" can also be caused by Memory Overload. If you are using the Grand Total or Sigma function, be sure to periodically clear Grand Total and Sigma by pressing GT or Sigma Total twice.

Sharp EL-2196BL... | 22 views | 0 helpful votes


Toner cartridge CRUM error (YELLOW)
CRUM cannot be read or written.

1. Connection trouble or disconnection of the connector and the harness between the PCU and the toner cartridge. Check the connector and the harness between the PCU and the toner cartridge.
2. CRUM trouble. Replace the toner cartridge.
3. Control PWB (PCU) trouble. Replace the PCU PWB.

Sharp MX-2700N... | 23 views | 0 helpful votes


Contact Sharp directly to inquire.

Sharp Office... | 17 views | 0 helpful votes


https://www.manualslib.com/manual/885094/Sharp-Ar-6020.html?page=111#manual

Are any of the indicators shown in the manual displayed?

Can you provide any more information using the Comment menu in FIXYA?

Sharp Office... | 611 views | 1 helpful votes


Fuser error clear 14

Sharp Office... | 26 views | 1 helpful votes


https://youtu.be/Am52gG4It3w
This will help you clear your error codes.

Sharp Office... | 24 views | 0 helpful votes


Hello Bheesam,
Turn off the power switch, wait about 10 seconds, and
then turn on the switch again. If this does not clear the
message, write down the code (Main code and sub
code exists.) that appears and then unplug the power
cord and contact your authorized service Rep.
Here is a link for you:
https://www.manualslib.com/manual/885094/Sharp-Ar-6020.html?page=111#manual

Sharp Office... | 31 views | 0 helpful votes


ou can Sim 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the fuserlamp

Sharp Office... | 27 views | 0 helpful votes


Use SIM 03-11 to check the shifter motor operations. Check connection of the harness/connector of the shifter motor. Replace the shifter motor. Replace the MCU PWB.

Sharp AR-M207... | 23 views | 0 helpful votes


sounds as if you don't have the proper divers installed for that printer. here's a link to get the software and make sure as it installs that the scanner software is one of the checked options so that it installs with the other drivers. https://www.driverscape.com/download/ar-5516-scanner

Sharp Office... | 27 views | 0 helpful votes


First you need the manual see what it is look for it in Google or company web.

Sharp Office... | 529 views | 1 helpful votes


Use a Q tip to clean all the rollers with alcohol and check if there is some paper wrapped around a roller.

Sharp Office... | 77 views | 0 helpful votes


https://translate.google.com


http://onenaijablog.com/2015/06/how-to-fix-call-for-service-h4-00/


Comment r?gler le «Call for Service H4-00» sur mon copieur Sharp
Si vous avez un scanner num?rique tel que le Sharp AR-M207, vous saurez qu'un jour, vous rencontrerez peut-?tre de petits probl?mes comme «appeler le service H4-00 ou L4-11». Appeler un technicien peut s'av?rer inutile ou co?teux, vous pouvez donc le faire vous-m?me.
Si vous photocopiez ou num?risez un document et que l'erreur «Call for Service H4-00» se produit, le red?marrage de votre appareil est la seule option possible. Et ci-dessous vous explique comment red?marrer votre copieur.
Pas
Nous devrons passer en mode simulation en appuyant sur # * C * 14 (HARSH - STAR - C - STAR - 14), puis en appuyant deux fois sur le bouton de copie. La machine red?marre et le code d'erreur cesse de s'afficher.
Vous avez red?marr? votre ordinateur avec succ?s...
Remarque: vous devrez disposer d'un doigt rapide pour pouvoir passer en mode simulation.

--------------------------------------------------

https://www.helpowl.com/q/Sharp/MXM310/Troubleshooting/clear-h400-error/1027388

D?faut de la thermistance de la lampe de chauffage principale, ou
D?faillance de la lampe du chauffage principal, ou
D?faillance du thermostat principal, ou
?chec du contr?le PWB.

----------------------------------------------------------------------------

https://www.photocopieur-sharp.com/codes-erreur-sharp

H4 00 FUSING SECTION LOW TEMPERATURE TROUBLE (TH_UM_AD2)

H4 00 SECTION FUSIONNEMENT TROUBLE BASSE TEMPERATURE (TH_UM_AD2)

Sharp Office... | 27 views | 0 helpful votes


Hello,
Just replace toner cartridge or refill the toner container with refillable sharp ar202 refill bottle or sachet. Remember to remove waste toner if you are refilling, right.

Sharp Office... | 61 views | 0 helpful votes


https://printcopy.info/?l=en&mod=erc&brand=Sharp&model=MX5001N&code=C1-14 Quoting from link above:

Code

C1-14

Description

Main charger trouble (Color)

Causes

The main charger unit (CMY) is not installed properly. There is an abnormality in the main charger. Disconnection of the high voltage PWB connector. Breakage of the high voltage harness. MC/DV PWB trouble. PCU PWB trouble

Remedy

Check the output of the main charger with SIM8-2. Check disconnection of the main charger./Replace. Check disconnection of the high voltage PWB connector. /Replace. Replace the MC/DV PWB. Replace the PCU PWB.

Sharp Office... | 57 views | 0 helpful votes


That's a main heater lamp issue, trouble shoot your main heater lamp

Sharp Office... | 35 views | 0 helpful votes

Not finding what you are looking for?
Sharp Logo

Family Lines

14,462 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...