Sharp Logo

Sharp Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 124K Answers
  • 3M Views

If the circuit breaker is the proper size for the unit (see the manufactures installation instructions), then the high current tripping the breaker is most likely a failure of the compressor. It is stalling causing high current. You may be on the verge of having to replace a worn out unit.
If the unit is more than 7 years old, you may hav reached the end of it's life.

Sharp Heating &... | Answered on Aug 10, 2019


Make sure that the blu ray player is indicating that the latest firmware is installed on it. Press the setup button go to settings and down to version. Then record the version number. If it is the most current firmware version number after all call 800-237-4277 pressing 1 for all of the prompts. Inform the representative that with the firmware version number installed on your bluray player you are having this problem with Avatar. This helps because Sharp is
gathering information on any occurrences after an update and they are working on another update to resolve any occurrences

Sharp AQUOS... | Answered on Aug 09, 2019


We just figured this out. We had already tried to update the firmware through the blu-ray device itself directly from the website. For some reason, that was not successful. We had to download the latest firmware from the samsung site onto our computer and then burn it onto a CD. Then we used the CD to load into the blu-ray and updated it's firmware to handle some newer movies we had purchased. It now is able to play the problematic movies. The samsung site has instructions for doing this. Good luck.

Sharp BDHP20U... | Answered on Aug 09, 2019


Sharp are working on a fix, it's to do with FOX and their anti-copy software, no date given.

Sharp BD-HP21U... | Answered on Aug 08, 2019


Hi Robert, so you say you have problems with the LCD panel's backlight system
Surely you have one or several LEDs burned
You should replace the LED's totality, because if you replace the wrong ones, the others could fail as soon as possible with the need to disassemble the TV again
For the replacement of the LEDs, the TV must be disassembled, remove the LCD panel
If you do not have technical knowledge, I suggest you look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Robert, por lo que comentas tienes problemas en el sistema de retro iluminaci?n del panel LCD
Seguramente tienes uno o varios LED quemados
Deber?as reemplazar la totalidad de los LED, porque si reemplazas los que est?n mal, los otros podr?an fallar en la brevedad con la consecuencia de tener que desarmar nuevamente el televisor
Para el reemplazo de los LED, se deber? desarmar el televisor, sacar el panel LCD
Si no tienes conocimientos t?cnicos, te sugiero busques un servicio t?cnico especializado
Espero puedes resolver el problema
Saludos Franco Dosil

http://www.sharpusa.com/~/media/E03A63CE0E304351979EEAF5273518DB.ashx http://www.sharpusa.com/~/media/4722105A0B904746BA01F23EB0CDF380.ashx https://www.manualslib.com/products/Sharp-Lc-32lb261u-3589829.html

Sharp Televison... | Answered on Aug 07, 2019


from sharp. It says in your operation manual that you need to call 1800 Be Sharp to get the stuff to update. Its something that you have to purchase

Sharp AQUOS... | Answered on Aug 07, 2019


goto sharpusa.com and put in your model number. download the update to flashdrive and the update your blu ray..and it will then play

Sharp AQUOS... | Answered on Aug 07, 2019


hi..ya you can play jpeg through the blue-ray
player.
check it out..
thank u..
rate me..

Sharp AQUOS... | Answered on Aug 06, 2019


If all other discs play, and only blu-rays cannot, the fault must be of its laser pickup unit.

Sharp AQUOS... | Answered on Aug 06, 2019


Line Fuse
If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won't start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. If you don't resolve the underlying issue, the new fuse will blow too. (Caution: The microwave oven can store thousands of volts of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. Due to the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the line fuse.)

Sharp Microwave... | Answered on Aug 01, 2019


Hi Don, for what you say, you have a problem in the backlight of the LCD panel of your Sharp
You should replace all the elements (LED) that illuminate the LCD Panel
I suggest you look for a specialized technical service
Greetings Franco Dosil

Hola Don, por lo que comentas, tienes un problema en la iluminaci?n trasera del Panel LCD de tu Sharp
Deber?a reemplazar todos los elementos (LED) que iluminan el Panel LCD
Te sugiero buscar un servicio t?cnico especializado
Saludos Franco Dosil

Sharp Televison... | Answered on Jul 29, 2019


Check fuser unit firrst

Sharp AR-5316... | Answered on Jul 29, 2019


The LC-19SK24U should not need an digital-to-analog OTA signal converter. According to the specifications, https://www.cnet.com/products/sharp-lc-19sk24u/ , it has NTSC (analog), QAM (unencrypted digital cable) and ATSC (digital) tuners.

I hope this helps.

Cindy Wells

Sharp Televison... | Answered on Jul 29, 2019


I am pleased that you see the problem.

Andrew - Fixya Super Moderator

Sharp Computers... | Answered on Jul 25, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76115 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...