Smeg Dishwashers - Recent Questions, Troubleshooting & Support


I've found it here
http://e.manualretriever.com/lect.php?ID=5190046&lg=E&h=d41d8cd98f00b204e9800998ecf8427e&src=15
I know the answer was a little late, but I Hope it helps others looking for it

Smeg Dishwashers | Answered on Mar 07, 2019


the E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model number to help you further pin point if possible.

Refer this site for 60 inch dishwasher and this site for 45 inch ones.

Smeg Dishwashers | Answered on Feb 14, 2019


The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights.
When it stops, what light are on?

Smeg Dishwashers | Answered on Jan 11, 2019


power control board or inlet valve has failed

Smeg Dishwashers | Answered on Jan 10, 2019


SOUNDS LIKE ITS HAD A LEAK AND TURNED ON THE ANTI FLOOD PUMP TREVOR, TRY UNPLUGGING AND TILT THE MACHINE TO REMOVE ANY WATER LYING ON THE BASE PLATE

Smeg Dishwashers | Answered on Dec 24, 2018


An installation manual would have to be ordered from Smeg although the standard manual could include installation information. Try Googling (smeg)(SDCY 66X1)(manual) without parens and see what turns up.

Smeg Dishwashers | Answered on Aug 19, 2018

Not finding what you are looking for?
Smeg Logo

672 questions posted

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Norman Al-Anbar

Level 3 Expert

630 Answers

paul
paul

Level 3 Expert

825 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...